ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Recent content by simonmac

  1. simonmac

    Loggyboy's racer - 750mc Ktec Clio 182 Championship

    Got a Sorento myself and towed for the first time last month with the Scooby on the back, was surprised at how easy the Sorento pulled it. Had mine remapped when i got it so got a bit more poke than the std 140bhp it came with.
  2. simonmac

    Brake kit recommendation

    cheers guys. I'll get the current calipers rebuilt I think then and invest in some new discs and pads. Just finishing fitting ITB's and Gen90, need to get a radiator sorted as lack of room, now I've saved some money I may go for the deluxe Pure Rad.
  3. simonmac

    Brake kit recommendation

    Firstly sorry, as I have hardly posted on here, but I have been lurking whilst building my track car. So after owning a 182 for 2 years, which I have stripped ready for a cage, fitted all the usual track day stuff to the car I now come to brakes. I originally had Brembo HC discs and ds2500...
  4. simonmac

    Corner weighting and alignment East Sussex?

    http://www.naduk.co.uk/ over near Littlehampton.
  5. simonmac

    Goodwood Festival of Speed 2018 - July 12th-15th

    Will be going Thursday as well as got the “free” GRRC members tickets. Doing Revival for first time this year.
  6. simonmac

    Lancer Evolution Appreciation Thread

    Just found thread as not in here often, currently saving my last few pennies for an evo after a mate purchased an evo vi tme rs about 6 months ago. Currently have a impreza rb5, impreza 555 v2 sti that is stripped for track build in progress and a clio 182 track car as my toys. Looking for...
  7. simonmac

    Bucket seat fitting, subframes, existing runners, harness, etc. Advice and tips?

    Not a problem, good to meet you to, always willing to help, will try and get some track days in again once I have my cage fitted.
  8. simonmac

    Bucket seat fitting, subframes, existing runners, harness, etc. Advice and tips?

    I need to price p&p but I was thinking about £10? Until I cost it all I am not sure.
  9. simonmac

    Bucket seat fitting, subframes, existing runners, harness, etc. Advice and tips?

    Sorry I meant to say they are zinc plated steel not stainless, I apologise.
  10. simonmac

    Bucket seat fitting, subframes, existing runners, harness, etc. Advice and tips?

    I am currently finalising prices and supply of motorsport spec grade 12.9 allen bolts and nuts, washers etc for fitting seats. I can also supply bolts for seatbelt mounts. These are stainless steel and from a reputable fastening company in the uk and are same as used by prodrive in there aston...
  11. simonmac

    Bucket seat fitting, subframes, existing runners, harness, etc. Advice and tips?

    Ok will check tmrw evening what i used on my car and put a set together. I think i know what i used anyway. I have nylocs but they weren’t 8.8, so I used normal 8.8 nuts with spring washers to stop then from undoing.
  12. simonmac

    Bucket seat fitting, subframes, existing runners, harness, etc. Advice and tips?

    I can sell bolts and washers you will require for omp/jon foz subframe and seats fitting, as i managed to get them from a fastenings distributor a friend works at. They are motorsport spec and at least 8.8. All female hex (allen key) bolts. Washers. Off top of head i can do lot for about £5 plus...
  13. simonmac

    Bucket seat fitting, subframes, existing runners, harness, etc. Advice and tips?

    original seats have 4 bolts that go through chassis and have to be undone from underneath car, the outer ones nearer the door are covered by 2 rubber bungs that you take off and can get to them, these two are the easiest to do. The 2 inside ones in the tunnel, on mine with a KTEC exhaust were...
  14. simonmac

    Powerflex camber bolt issue

    Pretty sure 120nm is way too high for camber bolts, can't remember exact settings, though around 65-70nm might be right.
  15. simonmac

    Safety Devices Rear Cage Fitting

    @markfishy - what is the supply and supply and fit prices for the new MSA Safety device full cages?
Top