ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Cleaning an induction kit filter?



The Chubby Pirate

ClioSport Club Member
  Golf R
Its actually for the Civic but hey, the place is a treasure trove of info!

I'm potentially buying a k&n induction kit (2nd hand) this week. The thing is in good condition however the filter is a touch dirty, are these easily cleaned? Specific method?

Cheers!
 
  focus st3
I bought 2 k&n cleaning kits from Eurocar parts for 18 quid,just make sure you get plenty of cleaning fluid as the oil lasts for ages.
 

MRBILLYUK

ClioSport Club Member
  FF Jeden Osiem Dwa
Use Autoglym engine and machine cleaner . Squirt it liberally all over the filter then wash it under the tap from the inside out pushing the dirt out , then recoat with oil .
 

Daniel

ClioSport Moderator
  Whichever has fuel
I have one on my driveway, I'll check*

*in two weeks when I'm back off holiday... x
 

Chrisgti6

ClioSport Club Member
  MR2,TT V6,Swift,Mini
Ive always washed mine with soapy water until clean, rinsed thoroughly and then stood on the garden wall to air dry.

I would never oil them, it just causes problems.

That's fine as long as you have a filter that doesn't require oil.

Running a K&N without oil for example, you may as well not bother with a filter at all. It's the oil that catches the dirt and stops it from entering the engine.
 

Darren S

ClioSport Club Member
Ive always washed mine with soapy water until clean, rinsed thoroughly and then stood on the garden wall to air dry.

I would never oil them, it just causes problems.

Same here. But then I use the oil spray on it afterwards. Rather than get your hands coated in the stuff as well, I normally chuck the freshly cleaned filter into a carrier bag and spray into the bag. Then just keep squeezing and kneading it until it's properly covered.
 

R3k1355

Absolute wetter.
ClioSport Club Member
EP3 Type R doesn't run a MAF so it's not so bad using an oil type filter, might still be worth checking the MAP sensor and IAT sensor to ensure they're clean.

K&N is a cotton filter element, cleaning with petrol can damage the filter element.
Warm water or the K&N filter recharger kits are the best bet.

The filter needs re-oiling after, the oil does all the actual filtering of the crap out of the air.
 


Top