J&R Drivers side Driveshaft

marcushookdale · Mar 8, 2024

Morning Chaps, Just a quick one , My 182 BG has been in the local garage now for a fwe months, New clutch / two new driveshafts , Passengerside a shaftec and the drivers side j&r shaft, MY question is do i have to grind the little square nobby bit off on the gear box, ?.Due to j&r driveshafts being a bit fecking shite, I am due to pick the clio up next week. I would of bought a shaftec for both sides , but i couldn't find a shaftec for the divers side at the time, But in the next few weeks i'm gonna try and grab one.....Cheers for any info lads.

Lozza-p · Mar 8, 2024

is it a cup/cup pack?

If so J&r ones don’t fit they are too short

Crayola · Mar 8, 2024

I've had 2 Shaftec ones for the offside of my 172 and both of them have had the inner boot come away from the cup, subsequently spraying grease everywhere

I told them to shove it up their arse and bought a Borg and Beck one for half the price. It's been spot on! I had to grind off the little square casting from the block but other than that the fitment is mint

marcushookdale · Mar 9, 2024

It's a FF 182.
I'm starting to understand why Renault named the clio FF now..More head f**ks then

marcushookdale · Mar 9, 2024

The lad at the garage said he's been for a drive in it, So i'm a bit puzzled with the j&r shaft meant to be to short.

hopgop1 · Mar 9, 2024

Mine were fitted by the previous owner, but I'm quite sure my shafts are J&R on my 182 FF.

marcushookdale · Mar 9, 2024

hopgop1 said:
Mine were fitted by the previous owner, but I'm quite sure my shafts are J&R on my 182 FF.

Yeah iv'e seen on here plenty have used j&r shafts on there 182 FF..F**King sh1t my knickers then reading that. LOL

Lozza-p · Mar 9, 2024

marcushookdale said:
The lad at the garage said he's been for a drive in it, So i'm a bit puzzled with the j&r shaft meant to be to short.

Maybe mine was boxed wrong then. it was about 10-15cm shorter, i emailed them with pictures and they just said that's the only one they list

marcushookdale · Mar 9, 2024

Lozza-p said:
Maybe mine was boxed wrong then. it was about 10-15cm shorter, i emailed them with pictures and they just said that's the only one they list

So after you emailed them, did you fit it ?

Lozza-p · Mar 10, 2024

marcushookdale said:
So after you emailed them, did you fit it ?

kept it in the garage for a few years and think i binned it when i moved.

MLB · Tuesday at 9:59 PM

Crayola said:
I've had 2 Shaftec ones for the offside of my 172 and both of them have had the inner boot come away from the cup, subsequently spraying grease everywhere

I told them to shove it up their arse and bought a Borg and Beck one for half the price. It's been spot on! I had to grind off the little square casting from the block but other than that the fitment is mint

I'm can't find any o/s driveshafts for my 182, is this the item you used?

Looks like a non cup abs ring, but assume I could just put a 15mm cup one on there.

Borg & Beck BDS1319 Drive Shaft Front Right 733mm Length Fits Renault Clio | eBay

MANUFACTURER PART NUMBER:BDS1319. Manufacturer: BORG & BECK. Spark, Glow Ignition. Axle Drive. OEM Numbers: 8200352042--RENAULT. Cooling System. Belt Drive. Front Lights.

www.ebay.co.uk

Mr Underhill · Tuesday at 10:06 PM

8200352042 is the right part number for a 182 and cup packed cars have 44 tooth ABS rings, which this also appears to have.

MLB · Tuesday at 10:11 PM

Picture looks like 8mm ring. But for that price I can't complain.

Much less complaining than when cleaning cv grease off the wheel, wheel arch and suspension. Twice.

Also now finding out it's all in my hair because I stuck my head in the wheel arch to check where the hole in the cv boot was😂

Mr Underhill · Tuesday at 10:20 PM

MLB said:
Picture looks like 8mm ring. But for that price I can't complain.

Much less complaining than when cleaning cv grease off the wheel, wheel arch and suspension. Twice.

Also now finding out it's all in my hair because I stuck my head in the wheel arch to check where the hole in the cv boot was😂

Says in the description 44 tooth. As you say, you can always fit one

Crayola · Wednesday at 5:58 AM

MLB said:
I'm can't find any o/s driveshafts for my 182, is this the item you used?

Looks like a non cup abs ring, but assume I could just put a 15mm cup one on there.

Borg & Beck BDS1319 Drive Shaft Front Right 733mm Length Fits Renault Clio | eBay

MANUFACTURER PART NUMBER:BDS1319. Manufacturer: BORG & BECK. Spark, Glow Ignition. Axle Drive. OEM Numbers: 8200352042--RENAULT. Cooling System. Belt Drive. Front Lights.

www.ebay.co.uk

Looks the same one I used yeah

MLB · 2024-05-12T21:32:43+0100

Installed the Borg and Beck driveshaft today and looks identical to whatever brand came off, except for the 8mm abs ring. Will see if it gives any problems and otherwise just put a 15mm ring on👍

Search

Search

J&R Drivers side Driveshaft

marcushookdale

Lozza-p

Crayola

marcushookdale

marcushookdale

hopgop1

marcushookdale

Lozza-p

marcushookdale

Lozza-p

MLB

Borg & Beck BDS1319 Drive Shaft Front Right 733mm Length Fits Renault Clio | eBay

Mr Underhill

MLB

Mr Underhill

Crayola

Borg & Beck BDS1319 Drive Shaft Front Right 733mm Length Fits Renault Clio | eBay

MLB

Similar threads