Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hello everyone. I would like to swap the intake from a clio 3 1.4 to my clio 2. It has the side entry TB where mine enters in the back. I found a good used intake for the clio 3 and a new TB for the same car. Will my Clio 2 ECU know what to do with it or will it need to be flashed for it?
I do...
So after a bit of searching here and google I am here to ask a question.
Will the 172/182 front brakes swap over to a non rs clio 2?
Mine is a 2002 1.4 16v 98hp.
I am looking into beefing up the suspension and brakes so I thought the brakes from the 172/182 would be much better.
Thanks
Like the title says. New regulator, new battery. For some reason I have a 4.5A current draw with key off. So I leave my battery ground off to keep it from draining over night. Now I was driving around and lights came on and my new battery was boiling over. Its overcharging even though the...
Yeah I looked into it realising the ECU needs reprogramming and such. but funny enough the 1.4 16vs here are more expensive. I found one for 350€ with shipping. I'll just stick to that one. mine lasted 260.000 km so let's hope the next one will too.
Hello I have a Clio 2 Facelift 1.4 16v. I have lost most of the compression in cylinder 2 and decided to replace the engine. It's cheaper than rebuilding and I need the car back up and running fast. I sourced a Megane 1.6 16v with 115hp for a good price locally (Germany). I know the 1.4 and 1.6...
Hello and good day. Just recently I have a problem with my clio. Phase two face lift 1.4 16v drive by wire. It won't start without giving throttle. It won't stay running unless I stay on the gas. Crank sensor is ok. Higher revs are fine but lower it stutters really bad. I've had a fail code for...
So I am starting to source my parts. What Piggyback did you use and is it easy to tune? Are there tunes I can download to get it started and work on it piece by piece? Or should I go straight to a Dyno tuner? There are not very many here in Germany since it's technically not always allowed...
Hello everyone. I have a few questions. I currently have 195/50R15s and I know a 205/45R16 will fit since the RS has them stock. I currently have stock springs with 15mm spacers on each wheel. I would like to go with 205/40R17 but I'm not sure which wheel size I should go with, with the least...
I have done some searching around but found no real answer. I would like to swap from drums to discs. is it possible without swapping the whole rear beam? Living in Germany there are absolutely none for sale. I know there are a few Non RS Clio 2s that have Discs So I was wondering if ti could be...
Nice video. As for widening the car I have 15mm spacers front and rear with 195 tires on my 15" rims. I also don't want to lower it as it's pretty low on it's own and with the wider tires and spacers it will rub and German streets are not well suited for lowered cars. I like to take this car to...
Front is already being sorted, pu bushings all around better shocks and springs with a wilwood brake setup. I'm not sure what else I can do to the front. Its going to be a road car.
I've also heard (read) that a lot of people swap the rear beam out and say it's a day and night difference
Hello guys I have a few questions. After searching the web in Germany (Yeah I know, it sucks) I am unable to find a rear Axle beam for a clio 172/182 at all. I am looking for ways to make my stock beam better (ph2 Facelift, 1.4l 16v). I will be getting/Making Bushings for all around so that is...
Hello, Like the title says I am looking to install a Harness bar from K-Tec in my 4 door Ph2 Clio. But I have a few questions.
I still want to use my rear seats since I have kids, and they love driving around town with me since my style of driving is a bit more fun than mommy, Lol. will the...
Sorry but I will be awakening this thread once more. But I figured it's still better than starting a new one.
I am looking to get better springs for my 1.4 16v since it will be getting a new turbo 1.6 next year and I drive this thing like I stole it in the city (So damn fun!).
I want stiffer...
And since my Hood is damaged anyway i will be adding a hood vent (similar to the Evo 8/9) Should I still go with the FMIC or does a Top mount have any benefits?
Ok but my biggest problem is I cannot remove the cats on a street car. I still need to pass inspection with this car every 2 years which is why I will use a high flow race cat. I've seen these hold up to 1000hp and are completely non restrictive. And I am going to Turbo the 1.6L
Thank you for...
Ok. I thought the K4M 862 wouldn't fit with my style of Transmission so I was going to go with the K4M 760 as a base since they are cheaper ( I won't be able to buy anything yet anyway since I am moving this summer (450km) and Looking for a new job)
With the Garret I would go with a T25 since...
Ok cool. the injectors are Renault part number 8200511099 Megane 225 R26
I can get a K4M 760 (115hp) for 350€ plus 90€ shipping
I just found on on Ebay.co.uk for 171.60£ shipping 120£ (Total 338.86€) Thats a lot cheaper than I expected.
Is there a difference in the engine if its Left hand...