Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I've done a search but seems peoples LEDs have three wires.
I'm using an led panel with 2 wires (red and black) that will be mounted to my rollcage. I want it to work with the doors open/close function of the roof light.
Which wires do I need to connect the new red/black to? Is it the Red and...
Planning on cleaning up and painting this RS stamped lower inlet manifold.
Does the injector seat look too crusty? All the others look fine, just one that doesn't
For those running GAZ coil overs, how have you secured the brake line? My gha's don't have anywhere to mount the small bracket which holds the brake line like my previous coilovers
Wanting to use the interior light (by the rear view) to power a light on my cage. So will need to run some additional wiring through the car - I want to keep it working with the doors opening and the OE switch.
Electronics isn't something I'm too clued up on, so...Question being what rating of...
I've "restored" my headlights with the 3M kit and they look brand new again. However I have been told i need to apply a sealant otherwise they'll just yellow up again in a few months.
What do I need? No idea what I'm looking for TBQH
After managing to get the belt on the pulleys (removing PAS pulley). The belt doesn’t sit centrally or in-line on the middle pulley (picture attached). Tried a few times Taking the belt on offbut always got the same result
I haven’t yet turned the engine of by hand via the crank pulley (furthest...
Need to get some threadlock for the pms ac delete bracket. Manual just says threadlock, not what strength.
Assuming medium with be enough or high strength worth using?
After a little help, having some confusion with removing the bracket that the a/c mounted to (might be being a bit thick). See attached picture for reference, three bolts out the front and it’s not shifting - can see two bolts on the left of the bracket, do these need to come out?
Also looking...
Whilst removing my alternator/AC today, as I attempted to crack the nut holding the red power supply lead, the terminal gave up and the cable hung loose.
The crimp part of the terminal is still on the wire. May have been why my alternator died, crappy connection maybe?
Either way, I need to get...
So my cars been stood (in a dry garage) for a couple months, it’s sorn’d so usually gets a short run down the road and back if it’s dry weather.
Battery had died so I’ve had it on charge (battery is kept off/outside the car).
Put it back on today and smelt something funny, so pulled the...
Came to clean and fit a set of gaz gha coilovers I picked up (rear coilover unit type) and I think one of the two piece sleeves is missing? I can’t remember if I had them with my other coilovers.
Assuming if it is missing I’m assuming gaz would be able to supply spares
So just putting the scenic shifter back into place. Testing gears and it’s rubbing on the heat shield quite a bit.
Anyone else found this? What have you done to rectify?
Currently bending it where I can
As per title really, Is it possible/has anyone fitted the ac delete kit with the rad still in place?
Granted it might be a little more tight/awkward. The cars not really due coolant change as it’s only a couple 1000 miles old
Need a reccomendation on some wheel cleaner, wife’s wheels on the mini have loads of caked on crap. Scrubbed a fair bit off with a microfiber cloth and neat shampoo, but still rank.
Heard of ironX being good but is it the best?
Ta
Fitting an oil pressure gauge, not using a sandwich plate. I have a braided line to use the oe pressure switch on the block.
Just looking for options on where to mount the sensor
So I have a constant issue with oil appearing on the top of the cam cover. I've tried all the suggested fixes on here (cam cover bolts out and add a bit of instant gasket to them & tighten back up, instant gasket under the breather plate). Still occurs. so I can only think that its escaping via...
What thread size is required for where the lower standard seat belts mount into the side of the car?
I've got some 3/8" eye bolts, but not sure if they are correct?
Engine is quite tappy at the moment, thinking of putting some of the Wynns treatment fluid in to see if it helps.
Anyone used it? Was planning on putting it before next oil change
Stuff in question...
Need to replace my rear bump stops. Can anyone tell me the size of them?
Have seen the following items, so considering them as an upgraded item over oem - http://www.demon-tweeks.co.uk/performance/bushes-bump-stops/spax-bump-stops
Thanks
Replaced my leaky passenger rear calliper with a nonleaky one from a breakers. Bled the callipers, new rear pads (both sides).
Looked at the car yesterday and noticed the outside face of the disc (pass side) was orange/rusty as they are after washing/standing in the rain - drivers side is...
Came to change a rear calliper today, all going fine until it came to separating the calliper and the hand brake cable.
Could not get it to shift from the guide hole in the calliper, surely it should come out?!
Need to change the passenger side rear calliper as its leaking.
What's the easiest way to get it off? Last time i changed a calliper i wedged the pedal down before undoing the brake line to stop fluid dribbling out.
Understand the handbrake cable may be a bit of a PITA!? Any info on getting that...
Due to fit my clubsport seat soon. Am I likely to need any additional bolts for the subframe/seat?
If so what am I likely to need, can go shopping in the stores at work for what I need
Thanks
Bought a new seat, so next is to order a harness. I have no clue which is going to be best.
Intended use - occasional track days (also a daily drive atm), will need to be ok for MOT, wrapping around harness bar on rollcage, bolt to lower seatbelt points
Have been looking at the following...