Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hi,
Can anyone kindly send me contact details for any specialist in the Bedford area.
I have a 2004 clio 182 which has a noise engine at idle but seems to disappear when you increase the revs.
Thank you.
Hi guys - I am new here.
I bought my 2004 Clio 182 a few weeks back. It is a 69k miles car with FRSH. I got it cheap with a duff alternator. Replaced alternator and got it going, happy days.
I drove the car for the first time properly a week after. I got about 3 miles then the aux belt failed...
hello to everyone.
im new here so sorry for my english and my ignorance.
i have a ph 2 clio 172.
i had a low compresion on the 3 cylinder, the reason was an injury on the camshaft which caused not normal function of the valve.
my question is if it possible to put an engine head from laguna? and...
Hello.
New here on ClioSport.
I have a 172 phase 1.
I have it for a while,it feels
A bit down on power.
I want to build high compression engine with
New KTR rods,high compression pistons 13:3 (original 11:1),K-tec catcams camshafts, KTR valve set,upreated valve springs,
ACL Race big end...
I've got a 55 reg clio 182 thats done 87k
Its got quite a loud and fask knocking coming from the top of the engine.
A mechanic has had a look and taken the rocker cover off but cannot see any visual damage.
Ive recently had dephaser pulley and belt done.
Anyone got any ideas?
My 182 is feeling like a mount has worn or so I think. When I'm coming to a stop or when braking hard I get a feeling through the pedals sort of a vibration . Another thing I've noticed is particularly when facing down hill on my drive reverse can be hard to select. Is this a worn engine mount...
I'm looking at buying a clio 182 , I went and saw one the engine was nice and quiet wen cold but after a run was very noisey , and wat else shud I look for wen buying one all help much appreciated , Ben
Ive just spotted some matched inlets from a company called MS Custom Engineering on Ebay and was wondering if anybody has them or heard if they are any good? Also any graphs would be good to see if possible too.
Cheers
Hi all,
Bit of an urgent one.
I was driving along, the dash went Christmas tree and the car cut out.
Symptoms,
on ignition the engine warning light flashes and the rear wiper moves. Stop, serve and esp lights are all illuminated.
The car will crank but not fire.
I'd guess it's UCH related as...
Hey All,
Looking for cat-back exhaust systems for my 182 in Aussie - I've had a trawl through the fourms, but thought I'd find out what the general consensus is (aware that loudness etc differs from driver to driver) regarding the different options. I've basically narrowed it down to either a...
Gave the Ph1 a good clean today and it's come up really nicely. Still needs a good clay and polish but it's getting there.
Restored the headlights as they were looking a bit yellow too.
Spent some time under the bonnet as I like the engine bay to be tidy.
In 2 minds whether to sell it...
Hi,
I'm new to the forum and would like to ask for some advice from you guys! To start with I know very little about cars and all the workings under the bonnet etc...anyway I decided to buy a new car, went to the Renault dealership (just to have a look) and took a Clio RS200 out for a test drive...
Ok so today my clio 172 went funny 140 mile round trip no issues then stopped to drop something off at a shop and boom. Running funny. Very similar if not the same to when an injector went and was running on 3 cylinders. This isn't my concern. My initial instinct was plugs leads and coil pack so...
So, I'm new to the Clio scene - only bought the car on 25th May.
I had the issue of the knocking on acceleration from the manifold, so thought I'd change all the mounts after a quick look see revealed that the lower gearbox mount was perishing.
Well, it seems its a good job I chose to do ALL of...
Took the car a run today and noticed it a bit "chappy"
Took it around the block and on the bypass, sitting at 70-80mph steady heard a pop and bit of smoke from engine and now sounds as if it's running on 3?? Any clues to fault?
Just a general info enquiry here. Worked on a 1.4 the other day (my first engine other than a 1.2 or 2.0) and was just thinking about the 1.6.
I'm looking to upgrade to a nicer but still relatively cheap Clio for a daily. I've seen a nice 30k 1.6 on sale for £1600 and I'm curious.
I don't see...
Hi guys
i hope someone can help me....
ive got a 2004 1.4 16v clio
yesterday the engine light started flashing and its begun to run lumpy and lack of power but not alot of power loss, anyway ive got a crappy car diagnostic reader at home and its come up with two faults
1. pedal position...
Hey,
So I have a Clio 197 (08 plate) with only 48,000 miles and fsh. Last night the engine decided to kill itself and put a whole in the side of the block and sump. Not good, and certainly not expected with a car that has been fully maintained and has fairly low miles.
The AA towed me to a...
I have a 172 and hearing a tapping noise from the engine
I changed the oil and filter monday
its had a full cambelt kit and aux belt kit fitted and dephaser was fitted
any ideas what it could be?
Hey folks, Ive got a 172 here fitted with a 182 engine from an 05 Clio, its still running the 172 ecu as it wouldnt accept the 182 one. It starts most of the time but when it does, it only revs to around 4500rpm, there are no warning lights or error codes coming up, nearly every sensor has been...
After fitting the dogbone mount the exhaust banging stopped for a while but I suspect the drivers side needs doing now as it bangs on hard 2nd gear acceleration particularly out of corners.
Which is best for what im after and anywhere best to buy from?
I'm uprating my my 182 mounts to KTec ones, I'm changing all 3.
Anyone got any tips or starting points?
Do I jack the engine up a bit etc??
Just building a car for racing and never done a Renault before so I'll be asking for all sorts of advice I'm afraid.