Driveshaft passenger side query

[Vivek]

Hi,
Accidentally pulled the CV boot off the driveshaft on the passenger side of the car while taking the hub off for a bearing change, car of course let loose plenty stinking gearbox oil. I replaced the cv boot clip with a Jubilee clip as that seems the standard on here with most people who are pissed off that it keeps coming off.

My question is when placing the driveshaft back in, what is the torque setting for the 3 bolts that hold the boot to the gearbox?

Also, please point out if I've done anything stupid here (first time doing this) and any tips for replacement, other than replace gearbox oil ect.

 

[oreA]

http://www.cliosport.net/threads/th...t-a-torque-setting-look-in-here-first.728550/

Can't vouch for the validity however :grimacing:!

 

[Vivek]

http://www.cliosport.net/threads/th...t-a-torque-setting-look-in-here-first.728550/

View attachment 187650

Can't vouch for the validity however :grimacing:!

Thank you so much, I searched around the forum and found other torque setting guides. But none had the one I wanted.
Thanks again!

 

[Jekyll]

When you replace the oil, use a garden hose to get into the box.

 

[Jekyll]

Like in here: http://www.cliosport.net/threads/dr-jekylls-rb182-progress-thread.792956/page-16#post-11318720

 

[bloke]

When you replace the oil, use a garden hose to get into the box.

but our garden hose is 30 metres long!!!!!

 

[oreA]

but our garden hose is 30 metres long!!!!!

Just order extra oil

 

[Jekyll]

Or loop it around the car a few times.

 

[Vivek]

Cheers guys