ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Brigsy's latest activity
-
Just buy a complete window regulator. Easy fix. Mine did the same thing https://ebay.us/m/We1ftO -
The decals arrived on saturday and pretty happy with them for the price,have to see how long they stay on.
-
Brigsy replied to the thread 1.2 16V steering rack, will it fit 172 steering column?.Ive changed a rack in situ without dropping subframe, not too bad. The solid mounted dci rack is loads better than oem in my opinion...
-
Brigsy reacted to Pepa's post in the thread 1.2 16V steering rack, will it fit 172 steering column? with
Like.
Thanks, it really was straight fit. For those who may be interested, with allready looped rack and 182 manifold it´s not that difficult... -
After some chatting to sparkie ref N/A tuning the 1397 I contacted piper cams and asked for a custom grind camshaft. A little back and...
-
If you know the specs of the cams, Ian will be able to tell you if it’ll work with the rest of the engine spec mate.
-
Brigsy replied to the thread Rough/Low RPM Unstable Idle.If obd is saying 900 id go with that. The rev counters can be quite far out. Clip might be better to see if you can reset the adaptives...
-
Brigsy replied to the thread 1993 1.4 rt.If you have power at the pump connector it should be pumping if it works. Id be checking the earth wire for continuity.
-
Brigsy replied to the thread Rough/Low RPM Unstable Idle.s**t cold running is usually due to the cold start mapping. Stock cold start has quite a bit of ign r****d to warm ths cat fast. No...
-
Brigsy replied to the thread Rough/Low RPM Unstable Idle.Worth resetting the adaptives on the ecu. Wonder if the icv adaptives can be reset on ph1. As for hot idle, will always be a little bit...
-
Yeah 10 mins out is factory spec I think.
-
Brigsy replied to the thread Meg RS250 handling issue.Good to hear abs sensor sorted it. Toe is OK as neutral, but would be better set at -0°10 overall ( -0°05' each side ), it will turn in...
-
Brigsy replied to the thread T. Turbo is back.Agreed, its got to be one or the other, fitted length not right or the hydraulic lifters are not controlling it right. Im unsure...
-
Knowing the f4r like I do, I don’t think any double valve springs are suitable for the standard hydraulic lifter setup mate, as the oil...
