ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Mossy's Cars



mossyv6

ClioSport Club Member
  Trophy,V6,5GT,AG200
182 Trophy

Radiator and AC Condenser and Dryer change.

A job I have been meaning do but following a topic on here I managed to find the part numbers and all parts came in for £90.

Stripped:
7EF2A166-6EC3-42A5-A1AD-27B068AB294E.jpeg

Cleaned:
C328454C-84C3-4A62-A68B-25B3DA502FF8.jpeg
7B462894-5817-4BC6-B024-8A017FB61728.jpeg
E7C412C0-E235-4B96-ABA2-C638BE425C29.jpeg
91E2547B-1EB7-4E16-8310-0469650B8D5B.jpeg

A few rusty bits:
1DE03D9B-FDE4-4499-B549-091965B8ED2C.jpeg
288A60AB-C97F-4D3C-BF99-FF43FAE7A9A3.jpeg

Old vs’ new
E4247B2B-E8FA-40B9-AC71-A3F0BF9BF800.jpeg

44F1FF87-EB02-4A13-AA5F-F39997022631.jpeg
 

mossyv6

ClioSport Club Member
  Trophy,V6,5GT,AG200
Condenser arrived, won’t be fitting it for a while yet but it’s absolutely the right one! Top work finding that bud thank you! Good bye horrible scabby condenser unit! What amazing value!
Good for you buddy and glad to have helped you out.
Bargain that, i wonder if it will fit my dci?
When I was doing my research it seemed a lot of Renaults used a very similar condenser and with a bit of cross referencing of part numbers confirmed it.
 

mossyv6

ClioSport Club Member
  Trophy,V6,5GT,AG200
182 Trophy

Putting front end back together.

Original headlights back in:
BCE09739-1C88-45F3-AFD2-81CACDFF42B5.jpeg

039D0380-F659-4D30-9293-12252AAAD672.jpeg

E0F7041A-ACF6-4D88-97AF-648D9BAB220B.jpeg

Next job was the rusty fastener for the wing and top bumper fixings:
C1C2197B-B80C-411C-992C-5268A909AA8F.jpeg

669ECA6F-4BB4-4E6D-8D61-91DE9EB23E33.jpeg

Also sorted out the swivelling rivnuts for the bumper undertray:
B2753031-D395-4C93-A3C0-1B28AC3AC8BD.jpeg

6C086584-87C8-4EC2-ACAA-7A0B3D1A980A.jpeg

And also cleaned up the engine under tray fixings, rivnuts still stationery :)
FF7B9B61-473E-4D54-8294-FE45D0990C8B.jpeg

Also replaced a rusty driveshaft jubilee clip:
D8EC6F12-AB7B-476E-B9EA-20E8B7A73F9E.jpeg

BE9B9D7D-2909-496D-8BC5-6E14BC110C1D.jpeg
 

mossyv6

ClioSport Club Member
  Trophy,V6,5GT,AG200
182 Trophy

Front end back together:
42863D83-1CD3-457A-AC4B-55F4A60540D9.jpeg

C2383584-36DC-4131-A962-6B8EA51085B9.jpeg

Also found this arch liner on eBay apparently of a 182? It took a bit of working out how it fits and I’m convinced it’s not off the sport range:
E132CB7A-E347-44BC-9F91-17D2455E93C6.jpeg

6AE60242-E132-437A-B7D0-806D2749F87C.jpeg

8D25E52E-4B3A-4B6F-8895-D06B7671E4E3.jpeg

A2E1E4E1-3A1C-4008-A5AD-3431C0FDB9A1.jpeg

Had a fastener on the left that didn’t fit anywhere? But the rest was all good, so it will stay :)
 
  Clio V6 and Ford Mondeo
Top work looks good, I assume that if I change the rad and air con rad I will need to have the air con re gassed and replace all the coolant ?
 

mossyv6

ClioSport Club Member
  Trophy,V6,5GT,AG200
Top work looks good, I assume that if I change the rad and air con rad I will need to have the air con re gassed and replace all the coolant ?

Thanks Chris and yes you will. Still got mine to do tbh. Coolant only arrived today at 4pm.
 

Ol’ Tarby

ClioSport Moderator
  Clio 220 Trophy
Excellent work mate, looks Bob on!

Does the 182 and phase 1 172 share the same radiator and AC gubbins? Anyone know?
 

Ol’ Tarby

ClioSport Moderator
  Clio 220 Trophy
Thank you and sorry not sure about the radiator but I would be surprised if the AC condenser would be different.
Did you replace the little O rings on the AC pipes mate?

I've just whipped my condenser and drier out so I'll get the above ordered
 

mossyv6

ClioSport Club Member
  Trophy,V6,5GT,AG200
182 Trophy

Coolant back in but turned into a bit of bOstard due to me not lining up for bonnet catch after refitting!! So bonnet stuck down solid fast with zero effect from the lever!
Tried normal trick of someone else operating the lever and me lifting/moving the front bonnet edge but nothing!
So I luckily found a post by @Louis @Archtronics (thanks you 2) and removed the front bumper leaving the grill behind (tapped it off with a rubber mallet).
Once bumper off you can see the catch mechanism middle top of the grill. I simple pushed in a long flat screwdriver and placed it up to the main catch centre lever that drops into the slam panel hole (has the spring around it), I tapped end of the screwdriver with a hammer against it and voila the bonnet popped open :)

So first time I have had to remove a bumper to do a coolant change:
E641C333-5681-4B9C-A99B-BF718683D98C.jpeg

New coolant and also temporarily refitted my induction kit to give me maximum room in order to get to the bleed valve:
82819F05-DDDC-4E11-91C0-86C6A3CEA78A.jpeg

And all back together:
CC32C1B2-0662-4654-954D-C8BE635AC22B.jpeg


No leaks and radiator fan comes in when it should :)
 
Last edited:

mossyv6

ClioSport Club Member
  Trophy,V6,5GT,AG200
182 Trophy

Spruce up of the rear arches and brakes:
3159AB8B-DADB-47E2-B602-73DD006E154B.jpeg

1D9210A6-2E20-435F-9537-6A15D36C85B9.jpeg

New bonnet catch fitted:

C62C99A8-6A32-431D-9682-6D98761168D3.jpeg

7C576F65-3C57-4E81-B728-FB7A00EA6B2E.jpeg

Borrowed an idea from @frayz to stop rear arch guard flapping about (thank you):
2587336D-F888-4D00-9690-64EE2F108DDE.jpeg

And blank service books for my 2 x Trophy’s.
D60C5F53-EBD4-4202-8B76-E2E49447568A.jpeg
 

Attachments

  • 7FAEDA16-51D9-4626-B36B-3F00A8AAA7A7.jpeg
    7FAEDA16-51D9-4626-B36B-3F00A8AAA7A7.jpeg
    618.3 KB · Views: 47

mossyv6

ClioSport Club Member
  Trophy,V6,5GT,AG200
Meggy Trophy


Just a couple of other small updates but rewarding none the less :)

Replacement rear view mirror as old one was on permanent dark view:

7413E8B8-C7D9-4F09-9F88-2A6A4F725F37.jpeg
69C4E81B-3565-4245-8613-1FBE222AA1AE.jpeg
14CA4860-36D7-4A08-B8F9-322146B64033.jpeg

Another sunglasses case fitted on passenger side:
3EBAB24F-E065-426C-8CB7-84B1E97A37A1.jpeg

CB0DC64C-6A64-476E-A591-5F63D171C978.jpeg
 

mossyv6

ClioSport Club Member
  Trophy,V6,5GT,AG200
Trophy's are looking good Paul 👍. How many cars do you have on the drive at the moment? Still after a 250?
Thanks Paul 👍 yes I still quite like the 250’s.
Nice job dude.
Clipping that little rear arch liner makes such a difference doesn’t it. 🙂
Yes great idea, so thanks 👍
I like the rear arch "thing". Any more info on that?
Thanks 👍 very easy to do. Drill 6mm holes and fit one of these through:
65CA8220-E84A-4669-B667-9A11747901B3.png
 

andy_coops

ClioSport Club Member
  172, VRS, Clio 5
Do you have a link for the bolts to attach the fan to the radiator pls mate? Had a search but can’t find any.
 


Top