ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

HELP pure motorsport exhaust 182



  BMW 120D M Sport
Im trying to fit my exhaust today, The car previously had an aftermarket exhaust on it when i got the car.

I think the car is missing plates that the rear silencer mounts mount too.. Im assuming the 8 studs coming out the boot floor are for a mount to be attached and then the rear silencer hangers mount to them?

if so does anyone know where i can get these from as the car never had them fitted with the old exhaust

thanks in advance
 

Pegasaurus Rex

Bon Jovi Officianado
ClioSport Club Member
B129DC14-6F85-4E08-ADFD-6709472BFD3E.jpeg

5C68E10F-EA33-461F-A5DD-42F9524577C7.jpeg

F92EA458-FA39-49B1-99FF-5C9C3CD7CE33.jpeg

Which bits are you missing out of the above? There should be two brackets which bolt to boot floor, the 182 exhaust brackets then bolt to this. If you are missing the brackets that bolt to boot floor the Proam racing do some beautiful stainless versions which will be much better than the pig iron Renault ones
 
  BMW 120D M Sport
Thanks for your reply!

its the 2 brackets that mount to the boot floor that im missing, Annoying as trying to get alot done to the car today and didn’t realise these were missing as the exhaust that come on the car had done away with these 😤

ill get some ordered now thanks again
 
  BMW 120D M Sport
Im
Planning on ordering the ProAm ones myself in the next couple of weeks as my ones are like fossils now! My exhaust is well on the piss.

😂 well im glad you commented and put me in direction of the proam ones then... just annoying when you buy a car thats been played around with by t***s so you don’t know stuffs missing!
 

frayz

ClioSport Club Member
There was an Unknown change over of the exhaust brackets on the later 182s. Not sure exactly when or why this was but some 182s have brackets that are 54mm deep, others are 64mm deep. The Pro Ams are modelled on the shallow 54mm design and is why on some cars it can raise the exhaust by 10mm.
My car originally wore the 64s and now the ProAm 54s to tuck the exhaust up tight.

89C7BA30-E16E-4072-AB8A-EF406D6D9D12.jpeg
D00DC47E-44BE-4D38-B209-4A187BE258ED.jpeg
3D69452D-E601-482B-A6B6-6FC13370EB2F.jpeg
 


Top