ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Another Mk1 coming out of the woodwork



16v_paddy

ClioSport Club Member
  Valvers & 172 Cup
It was whilst the engine was coming out to do the rear main I was contacted by Beanie offering to sell me his Sadev 6 speed sequential gearbox, so I managed to beg, borrow, steal and do a part ex with my freshly rebuilt Gripper diffed box to get my mitts on the Sadev

20180129_154508.jpg
20180307_174603.jpg
20180312_202622.jpg
20180310_153949.jpg


Took a fair amount of effort & dicking about to get it all fitted and get a gear indicator display wired in but the next big job was another custom exhaust system but this time in titanium from Flux Fabrication.
A lovely piece of work, all in 2.5 inch with silencers mounted under the boot floor to guarantee ground clearance and keep it quiet enough for track use. It was tested at Bedford & did 85db @4,500 rpm so it's pretty much perfect for any track in the UK

79168980_10157931027660972_8431839422814617600_o (1).jpg


We then had a very successful day testing it at Bedford, the weather was vile in the afternoon but the Michelin Race wets worked miracles & let us just push on as though it were a dry day.
Got a few annoying little niggles with the car to sort out but nothing that stopped the day plus we also had a decent turnout of Mk1's including my old Naples Valver

79638824_10157930125330972_868906136344985600_n.jpg
78358931_10157930125495972_567771745700806656_n.jpg
78068683_10157930102070972_6262009618319278080_o.jpg
78199538_10157930101935972_7109094812539682816_o.jpg
78570060_10157930101955972_4790677212825124864_o.jpg
 

16v_paddy

ClioSport Club Member
  Valvers & 172 Cup
I suppose I should update this as it has been 3 & a half years 🙈

Last trackday was just before lockdown with a few other Mk1's & Mk2's

84329309_642435653227519_8573814256888184832_n.jpg

84334522_642441296560288_7679311064646811648_n.jpg

83996536_642441173226967_3105577859737976832_n.jpg


84562432_642441923226892_6997370773161639936_n.jpg


83725765_642435816560836_448168528688709632_n.jpg


Had a premature end to the day with a track rod end somehow managing to strip it's threads & half come out of the hub whilst going round Gerards :oops:
Another issue was that the clutch isn't up to the job of flat-shifting into 5th & 6th gears so have to spend some money on a fancy one instead
 

16v_paddy

ClioSport Club Member
  Valvers & 172 Cup
Started to fit the doors and test fitting an 8j wheel for even wider tyres on the front

20220606_163355.jpg

20230501_141415.jpg


Back into the workshop to rip the engine out and fit a new Sachs Performance Race clutch along with a Mk2 DCi steering rack for less turns lock to lock over the Mk1 manual rack

20220527_190045.jpg


And because the Sadev box is a little bit bigger it's actually impossible to remove & refit from the top so dropping it all on the subframe is required


20220528_170736.jpg



Then I got talked into doing some silly stuff so now going for a complete rewire, new ecu and bigger throttle bodies with fly by wire so that the gearbox can be used properly with flat-shifting and auto throttle blipping for the downshifts


20220615_153933.jpg

20220615_153943.jpg



Also part of the upgrades is fitting individual coils from an Audi R8 which required some "modification to the cam cover

20220726_171504.jpg

20220726_171606.jpg

20220728_154920.jpg



An issue I encountered was that the new bodies fouled the alternator so after a lot of faffing around because it wasn't possible to lower the alternator anymore than it was, a smaller one was needed.
Thanks to someone else doing the hard work of finding a suitable alternative for a similar issue on an F4R, I've got an alternator from a 1986 Suzuki Swift GTI so this is how the car currently sits as I've done sod all since January thanks to my 172 Cup's engine shitting itself :rolleyes: and the manifold & bodies are with a fabricator to make them fit together


20230501_141530.jpg
 

Rocky_2483

ClioSport Club Member
Nice. I've just got another MK1 but going to keep it standard but I love looking at what others have done and the photos. I will have a proper read of this when I'm at work one day.
 

16v_paddy

ClioSport Club Member
  Valvers & 172 Cup
Bit of an update: Finally got the itb's back

381532919_1517305902407152_2475960664858557678_n.jpg

382459568_1517306039073805_3195842413866778022_n.jpg

382466450_1517306132407129_7570210075435446892_n.jpg



When deciding what to do about what trumpets to use, I found out that the airbox from the bike the bodies came from was quite fancy. It has a motor in it that adjusts the length of the trumpets so I don't need to compromise on trumpet length to suit horsepower or torque.
The downside to this is that I have some "space" issues to resolve 😬

381651142_1517306112407131_8367583359858713316_n.jpg
 

16v_paddy

ClioSport Club Member
  Valvers & 172 Cup
In the effort to resolve the above mentioned space issues, I got my hands on a pov spec bonnet to use for marking up to work out exactly where to cut so it clears the airbox before chopping up the carbon bonnet

382183644_1517306179073791_6609226973612651695_n.jpg

381518759_1517306165740459_669717165226485655_n.jpg

381515470_1517306212407121_6046216737730122945_n.jpg

382455600_1517306275740448_351642589150758318_n.jpg

381694987_1517306235740452_3193981135617241951_n.jpg

381636974_1517306339073775_4685124856233435744_n.jpg


I've sent the bonnet away to be fettled with and close up the hole whilst still clearing everything it needs to
 

16V F7R

ClioSport Club Member
  Clio 16V
Absolute weapon this. Proper job. What power do you think you will have now paddy?

Must be epic when you can flat shift that gearbox also.

KEEP THE UPDATES COMING 👍
 

16v_paddy

ClioSport Club Member
  Valvers & 172 Cup
Not sure what to expect power wise now tbh 🤷‍♂️
I was hoping to see close to a genuine 250bhp with the bigger itb's and EGT sensors in the exhaust manifold but I've been told that the injectors in the airbox combined with the variable trumpets in it will help gain even more power so it's anyone's guess
 

16v_paddy

ClioSport Club Member
  Valvers & 172 Cup
Done a bit of cardboard aided design & some gentle massaging with an angle grinder to facilitate the radiator that's going in

385074250_1521805841957158_3023420650567510322_n.jpg

384999557_1521805911957151_7346661359419316702_n.jpg

385334615_1521805931957149_5499562728202320148_n.jpg



Got my hands on the radiator today. It's not finished yet, I just needed it to test my C.A.D skills and mark it up for where the fittings will need to go.
It doesn't fit very well atm so the car requires a bit more massaging with a grinder & hammer and a slight trim of the airbox to get it home


384993129_1522808465190229_1891632347379107392_n.jpg

385035854_1522808555190220_1350562253718389132_n.jpg
 

16v_paddy

ClioSport Club Member
  Valvers & 172 Cup
Got the finished radiator back today to start fitting it properly

393508104_1530920631045679_6778936543249981753_n.jpg

393713771_1530920764378999_8375067426045685471_n.jpg

393683649_1530920887712320_7849386569548523423_n.jpg


Minimal bodging needed for the bottom rad hose, just a joiner and a 90 degree hose


393723158_1530920914378984_5549776503386513487_n.jpg


A look at how snug the fit is after getting happy with an angle grinder on the subframe. A job for later will be getting it welded up to put the strength back into where it's been chopped and a plate adding to support the radiator

393508771_1530921017712307_2490505740709599267_n.jpg


Needed something to help direct decent airflow into the airbox with the intake now being at the bottom & pointing at the floor.
A bit of ducting for a Bosch kitchen extractor fan was a close enough match to the size of the intake hole in the airbox

393641976_1530920937712315_5736824958156604105_n (1).jpg

393621102_1530920991045643_6981018851354611104_n.jpg

391678139_1530920977712311_4021167174248843019_n.jpg

393568589_1530920961045646_5250667367636692347_n.jpg
 

16v_paddy

ClioSport Club Member
  Valvers & 172 Cup
Got something that vaguely resembles something that's similar to how it's done on a standard Valver, a nice simple oil breather from the rocker cover to the airbox

393571175_1530921074378968_8686073098003914311_n.jpg


Bit of bodgefuckery with rape tape to test if my existing fan will actually fit, thankfully it does and doesn't get hit by the clutch fork so just needs a bracket welding to the rad and that's all good

393491862_1530921061045636_4882590037003282392_n.jpg


More bodgineering with rape tape, this time to hold the rad in it's finished position as the subframe needs to have a plate fitted to allow the rad to fit in the weird-ish position it needs to sit


393414926_1530921101045632_1300162878190752608_n.jpg

393501456_1530921124378963_4864326635504059080_n (1).jpg
 

16v_paddy

ClioSport Club Member
  Valvers & 172 Cup
Got the bonnet properly fitted today and it clears everything that it needs to inside the engine bay so I'm happy with the results 😁


398404500_1540903233380752_1224148495410113259_n.jpg

398431023_1540902993380776_6191843255561738405_n.jpg

398816103_1540903113380764_8216671785478209711_n.jpg

398986022_1540903190047423_3804195781650226902_n.jpg

399267771_1540903210047421_6351304972732923912_n.jpg

398435366_1540903253380750_6234112369327626275_n.jpg

398921548_1540903326714076_2153249549982244836_n.jpg


Can see where the subframe has been cut to accommodate the radiator so getting that welded back up is next on the list

398729181_1540903286714080_3425003704824031228_n.jpg
 

Hollidog

ClioSport Club Member
  182
What bodies/intake are these mate? Toyed around with the idea of variable intake trumpets for a while but decided it would be prohibitively expensive.
 

16v_paddy

ClioSport Club Member
  Valvers & 172 Cup
What bodies/intake are these mate? Toyed around with the idea of variable intake trumpets for a while but decided it would be prohibitively expensive.
The bodies & airbox are from a BMW S1000RR motorbike, the manifold is a normal Jenvey item for a Mk1 Megane & the adaptors to make the bodies fit are custom made.

The airbox is the only thing that has the mechanism for the trumpets in it & it isn't really expensive or difficult to find & you could probably make it fit with a bit of butchery and without having to also use the bike bodies

 

Nafoff

ClioSport Club Member
Got something that vaguely resembles something that's similar to how it's done on a standard Valver, a nice simple oil breather from the rocker cover to the airbox

View attachment 1665454

Bit of bodgefuckery with rape tape to test if my existing fan will actually fit, thankfully it does and doesn't get hit by the clutch fork so just needs a bracket welding to the rad and that's all good

View attachment 1665455

More bodgineering with rape tape, this time to hold the rad in it's finished position as the subframe needs to have a plate fitted to allow the rad to fit in the weird-ish position it needs to sit


View attachment 1665456
View attachment 1665457

The execution of the airbox/radiator looks very familiar.....

clio3.jpg


I approve
 


Top