Search results

I use menzerna polishes on hex logic pads, followed up with tripple on a finishing pad and prima epic wax. they worked well on my 1.2 but like I said the pad was falling apart during polishing so each panel was only run over once. Shame really as there's still a few swirls but it will do till I...

Update time! Minor bits of progress since last time. finally had my braking problem fixed causing pedal judder under light braking, turned out to be cracked drivers side ABS ring. Cooksports didn't go ahead in the end as the person I was purchasing them from had been messed around with some...

Looking at your photo of the changer plug id say it's the connects 2 interface see below as this is what I have, the plug is clearly shown on the image http://www.ebay.co.uk/itm/350966243541?redirect=mobile

This thread has made me question it, I got the info I posted from another thread on here but that may have been wrong, I'm nipping out soon so will find out which is which with my radio

Yeah tuner list just requires the lead, don't quote me on it but I below this is what you require http://www.ebay.co.uk/itm/Renault-Clio-Mp3-Aux-in-3-5mm-Adaptor-Convertor-Lead-wire-ipod-2005-2011-Pins-/140896754370?pt=LH_DefaultDomain_3&hash=item20ce19dac2 Just incase your not aware this...

It should say on the front of the headunit somewhere, either 'update list' or 'tuner list' With the tuner list I believe you will just need an aux cable from eBay about 6 quid which will plug in to the back, if you have the update list you will need a connects 2 aux adaptor box. Ill double...

Have you got an update or tuner headunit?

Both of the cars are looking well, good choice of alloys they both suit well, what's the quality of the carpet material on the mats like as I'm after some?

Once the rubber coating came off did it just leave the plastic finish beneath or did it discolour it? I'd just like to removed the rubber coating on mine as it's heavily scratched!

n2grafix in the traders section sells them, drop him a pm

Looks sweet! How you going to get on with the box on track though? How much did the mats set you back also? :)

I'm still only young so I have a curfew to be in by 9 :wink:

I'm 100% going, will be for the day only though.

Cheers dan, going to get some ordered, of course that's if you don't fancy trading cars? ;)

Looking at ordering some spacers and remembered how perfect yours sits on the front! What size are they mate? @dann2707

Small bit of progress, removed the renault elf sticker our of the rear window for a cleaner look. also removed the 'renault sport' badges from the rear and replaced with a clio 200 badge. Came off surprisingly easy with hot water! I debated which side to put it on but settled for the left...

Not sure if serious? @dann2707 Hahahah there coming from Kieron but it's now Sunday and haw also going to fit them which I'm very grateful of!

My bad, I'm terrible at reading between the lines :( although there was supposed to be a wink face but didnt appear so it looks like I was serious, oh well

Not quite, it's Abit like hangman, dashes equal to a missing letter

Cheers mate! it will be in good hands with mick he's a knowledgeable bloke. Have I balls hahaah! Something better is happening tomorrow though, here's a clue on the brands name: C - - - S - - - T Try and guess that

Try this mate it should work, @JD_RS172 http://www.ebay.co.uk/itm/201051493337?redirect=mobile

You thought about booking an appointment? www.specsavers.co.uk

Abit unlucky that is, did they mention anything about the number plate? I'm so close to ordering one hahahah!

I'm more than up for it, just don't want to put my name down incase if anything creeps up yet :)

Looks well! Behind the headlight is proven to be the best location for the induction kit for air flow and temperatures

Cheers mate, mine also cruise and speed limiter but no cd changer. Although I'm not too fussed as I have fitted an aux module in its place! :) Car had the belts done yesterday with mick at diamond motors who did a top job and kept me informed on niggly bits that needed doing. Also just ordered...

Quite Abit of an update, firstly the car is booked in for cambelt, dephaser etc with mick at diamond motors on Tuesday. Since the last update the following has been done: -aluminium footrest -stainless steel engine cover bolts -aux connects 2 adaptor -Cliosport URL sticker -Bosch aero wipers...

Nope, it would probably benefit from it at some point but as it didn't do it before I swapped to the ik it must be something to Do with what I've done

Took it all apart this morning, checked the pipe from the tb to acoustic valve, gave it a waddle put all the setup back together, tightened the clamps tighter and took it for a drive. Let it warm up Etc and it's fine now but we shall see