Search results

This!

So I just order the PMS shifter :) Also got a new 4 point safety Devices harness ready to be fitted waiting at home whilst I'm offshore

That corner is a good one! I know that silver M3 @40 seconds, proper quick!

Hi all Looking at routing some ducting from the passenger side fog light to the air box inlet pipes. What size ducting would I need to go from the fog light? I have seen 100mm used from the fog light? I have removed the acoustic valve and have headlight blanks fitted with air intake holes on the...

Had headlight blanks fitted! Also replaced the engine and gearbox oil, replaced the power steering pump and power steering fluid and had alignment re-done. I'll be getting the pure motorsport rear stub Axles, and a 20min toe shim for the rear passenger side and adjustable wishbosnes shortly.

Many thanks for the replies :up: So would it still be okay to use the millers nanodrive 5W-40 for track or would it be better to switch to 10W-50?

I will be using the Millers NanoDrive CFS 5W-40

How come using 10-50 over 5-40? Just curious :)

So we moved house on Monday from North Walsham to Seething (just south of Norwich). Car now lives outside, so is covered with a Halfords Advanced Car Cover. Also, got a oil drain tub for when change the engine and gearbox oil and a pump to refill the gearbox using the guide from here (remove...

Hi all I currently have the ktec uprated mounts fitted (black ones) but I'm looking at getting the race mounts (red ones). Had anyone got the race mount fitted? From the website: "By popular demand we have now released a competition specification set of engine mounts for the Clio 2 RS range...

X2!

Fitted the PowerFlex black bushes to the exhaust mounts today. The left hand side original bush wasn't too bad but the right hand side bush had failed so the exhaust was resting on the mount itself. Good job I had a spare mount as when we went to push the bush into the mount it cracked the...

Out with the old in with the new. Replaced the original upper gearbox mount with the uprated ktec mount today. Had to remove the casing/ spider as had to fit longer bolts where the mount is bolted to the casing.

Replaced the powerflex bush with the ktec engine mount other day. Just got to fit the upper gearbox mount next As said, I'll be looking at getting a new harness so my TRS 4 point belt buckle style harness will be for sale soon. Has anybody used the headlight blanks with intake hole from...

Many thanks for the reply, so would one of these oil be okay http://www.opieoils.co.uk/p-1020-red-line-synthetic-manual-transmission-90-mt90-75w-90-gl4.aspx http://www.opieoils.co.uk/p-68953-motul-gear-300-ls-75w-90-limited-slip-differential.aspx It says they meet api gl4/gl5 standards

Cheers bud:cool: By the looks of it, it would be between a couple I.e http://www.opieoils.co.uk/p-60232-millers-oils-crx-ls-75w-90-nt-competition-full-synthetic-transmission-oil.aspx http://www.opieoils.co.uk/p-68901-fuchs-titan-race-syn-5-75w-90-fully-synthetic-gear-oil.aspx...

Hi all Can you recommend a oil for gearbox with LSD (gripper) for my track only 182 Regards Josh

So yesterday managed to finally fitting the rear camber & toe shims to the Clio and replaced the stub Axle bolts with ones from PureMotorsport. That means the rear camber should be -2" both sides and app. 10' toe-in both sides. Now just looking at getting the ktec engine mounts and also a new...

Looking at getting the Pure Motorsport Billet Rear Stub Axle & Larger Rear Wheel Bearing Kit to replace the crappy rusty old ones. Anybody's thoughts on these?

New exhaust bushes and new exhaust machines mount has been delivered at home, so will fit these when get home from offshore.

Hi all Just wondering if anybody has got these fitted to there Clio's http://www.pure-motorsport.co.uk/details.php?itemid=330&model=6 It's the PMS Billet Stub Axle. Many thanks

Fitted shims to the rear RHS of my Clio 182 track car. However when removing the stub of the axle, 2 of the 4 heads on the bolts were fubbard! Must have happened during the build:down: so going to order new set of belts from PMS to replace bolts on both sides. Only fitted 2 bolts atm as needed...

Fitted puremotorsport shims to the rear RHS of my Clio 182 track car. However when removing the stub of the axle, 2 of the 4 heads on the bolts were fubbard! Must have happened during the build:down: not happy after money spent to find this! Going to order new set of belts from PMS to replace...

Fitted puremotorsport shims to the rear RHS of my Clio 182 track car. However when removing the stub of the axle, 2 of the 4 heads on the bolts were fubbard! Must have happened during the build:down: so going to order new set of belts from PMS to replace bolts on both sides. Only fitted 2 bolts...

It's going to be a fast road/ Track car so not going made with it. Got new brakes to be fitted all round (ferodo ds2500 front and rear with brembo hc discs up front standard rear discs) and motul rbf600 brake fluid. Also, got Yokohama AD08R tyres to be fitted. He has removed the rear seats. It's...

Was at Donington on Saturday 19th with the MINI Challenge doing a taster day. You were able to take one of the series race cars out for a 20min session basically to see if you want to start racing in 2017. I took one of the Open Class minis out which was a R56 mini at 180bhp/ton (this mini was...

I've also ordered the 30min shim from PMS. So in all, the 10min shim will be fitted to rear left for the toe and the 20min shim will be fitted to the rear right for the toe along with the 30min for the camber. In total, it should give 10min toe in left and 6min toe in right and -2degrees camber...

2 photos from Sunday at Snetterton On a separate note, had the gearbox oil changed on the family wagon/ towcar mk2 V70 T5. It's an ex-police car, so been serviced fairly decently i.e. Engine oil replaced every 10k miles and I've had the oil replaced 2x in the past year and half however never...

Many thanks Mike :up: now ordered, so look at fitting these ready for next year :cool: