Search results

Build the cage up in the car and position everything front feet centre feet and make sure the cage is pulled towards the back of the car so the rear feet are on the arch, and the centre feet are as wide apart as possible (you may need to force it out a little, I used ratchet straps. tack weld...

I just ground mine down until they fit the floor profile and the rear feet will pull to the shape of the arch

If you have a cage, buckets, harnesses etc it should not matter for the MOT (I e-mailed VOSA to check) but I still got mine turned off with CLIP so when the ignition is on all lights illuminate then go off once the engine has started

If I were you I would keep trying to replicate the problem and if you can get it to do it more than a couple of times get it checked out, possibly even at a Renault dealers and inform customer services. If it does not happen again don't worry about it as I am sure your wife will never forget to...

Pure Motorsport, I have the gear linkage and top mounts and strut brace and they are well engineered bits of kit so would assume the exhaust is the same

you should not be getting brake fade on the road, on a track where you are stamping on the brakes every few seconds and braking from high speed I am sure a more open wheel will reduce brake fade but it will be more down to type of pads, discs and fluid used

I am after some slightly longer nuts for my wheel studs to make it easier to screw them on by hand. Has anybody used the Racing Composite R40 nuts? They look quite good steel nut with a separate rotating aluminium seat...

It isn't too hard to use, key is use lots of heat makes it much easier

I used Di Noc on mine

Thats the problem with this it does not fit under without being driven on wood first I'm on cooksports, that's why I brought the sealey

Good idea with the door cards, at least it keeps the top of the door tidy. Good work

Thanks :D

Had a bit of time today so made myself a new saddle for the Halfords trolley jack. Now I am getting a second set of wheels I will need to take a jack with me to tracks so it was either take my big sealey jack or this. I have never liked the saddle on these as it is too small so found some steel...

Has anyone got a bracket drawing or cad file for the brackets to fit some Wilwoods.

I ordered winter tyres off them had no issues at all, they came from Germany but service was better than a lot of UK companies

looks like they have been engraved on a machine, the uprated cams that I have seen are all hand engraved so I would say those are standard.

I have just ordered another set of wheels for dry tyres, using RSR's at the moment I was going to have them as a all rounder but they worked well on the wet day I did a few weeks ago so keeping them for wet days and road driving and getting some Dunlop DZ03G for dry. From what I have read they...

have a look at the ABS ring, cup packs have a thicker one iirc about 15mm

Cheers mate I will have to have a look

My clutch pedal started creaking when I was doing a trackday a few weeks ago. It started when the engine bay was very hot but the next day it had stopped. Is there a point that needs re lubricating?

Cheers look good what offset you running with those and what camber you got?

anyone got any pics of the wheels fitted in 15" I have found a few but not sure they are 15" ideally with the wheels in white on a black car Thanks

I am getting myself a second set of wheels, but not sure what to get. The car is a track car but driven to and from the track. Currently have a set of 7x15 pro race 1.2 in anthracite with Federal 595 RSR tyres which will be used for road and wet and damp days. I am getting a second set for just...

It is common with bolt set up, if you convert to stud and nuts it does help (so I have read), all down to the heat into the hubs. Mine kept coming loose a few weeks ago at Bedford, after each time out I would check the nut torques sometimes they needed tightening up (110Nm I set mine to) I...

Stevie has done a good job on that mate, should sell that no problem now.

hope they got arrested for that

Lol

Good idea

Not 100% sure, if I rest my hand on top of the gear knob it stops, I am wondering if it is the sleeve rattling on the inside if the gear knob

Rattle starts about 65-70 mph. I may have a mess with it one of the days when I have time but in the meantime I have some earplugs lol