Search results

Bore will need to be MINIMUM of 60.1 or you would have to get the bore machined out to 60.1 if it was smaller, larger bore is OK as you can get spigot rings to reduce the bore. PCD will have to be 4x100 nothing else will fit. offset if you have a cup you will need et38 as a maximum (you could...

Yeah much easier without the cage, I fitted my cage then decided to paint the interior and just masked it off as I could not be bothered to remove it again

PCD is 4x100 centre bore is 60.1 wheel specs here Clio Renaultsport 172 Wheel: Renaultsport 7x16 ET48 Clio Renaultsport 172 Cup Wheel: Speedline Turini 7x16 ET38 Clio Renaultsport 182 Wheel: Renaultsport 7x16 ET45 Clio Renaultsport 182 Trophy Wheel: Speedline Turini 7x16 ET45

Get the strut brace before fitting the top mounts as the holes have to be in a certain position, and yes it is a great piece of kit well worth the money.

I thought that but it was easy, I just wiped it all over with panel wipe then a tack rag then sprayed it.

worth having a look on ebay at http://stores.ebay.co.uk/Magik-Wheels?_trksid=p2047675.l2563 that is the factory and they sometimes have so cheap deals, or message them for a price

If you have not got all the tar out I found WD40 good just sprayed it on and it wiped off with a cloth. Also spray the interior with rattle cans I did mine cost about £15 with paint and plastic sheets to cover the car and it is a very good finish and looks 100% better.

I have pro race 1.2 in 7x15 and using 205/50/15 RSR according to the federal specs 195/50/15 are not suited to 7inch wheels, I am sure they would be fine but the manufacture knows a lot more than me so I just stuck with the 205 as they were only about £8 per tyre more expensive. I f you look at...

not got any good pics but you sort of get the idea with these

Mine are a tight fit with the Bimarco Futura. I think the main reason for this is the cage was designed for standard door cards to be used. When I first fitted mine I had standard door cards and they were just touching the door bar, but now I have carbon door cards there is a massive gap. My...

Cheers I have just ordered one

Cheers that was the one I was looking at, have you got any photos of it fitted?

Cheers and yes http://www.cliosport.net/forum/showthread.php?725592-My-BG-182-Track-Car-Build

Anybody got one, and do you think they are any good not cheap really for a bit of cloth with straps on. Was thinking of getting one for the track car as there is really nowhere to store the helmet to stop it rolling around.

No

It is worth trying the Cooksports as if you don't like them they seem to sell for good money secondhand so you would not lose much on them.

TBH mate I have not really driven it much as I have been finishing it of, but for the time I have driven it they seem fine to me (but I also have PMS solid top mounts and strut brace) The car will be mainly for track but will se the odd Sunday blast

I had my new toy and did not want to try it on the 250 in case I wrecked the paint so I used the clio as the guinea pig

lol it hasn't been used yet, I'm sure it will change once it starts getting used It's on standard cup shocks with cooksport springs

Thanks :D

Little update on this I attempted to make some fibreglass brake ducts which turned out to be a disaster lol, so I ended up using some air feed trumpets and tbh I am pleased with the results. I have tidied all the wires up in the rear so the drivers side are all fed in between the panels and...

Got my DAS 6 Pro last week with some Meguirs 105 and 205 with hexlogix orange and white pads, so I decided to test it out on the track car first as it had lots of surface scratches and swirls. Really pleased with the results looks like a different car now. I washed and clayed it on Wednesday so...

447

if it is just to get the fogs out just remove the front arch liners and you should be able to get to the bolts holding the fogs in

yes they just unscrew, iirc they are a M5 thread

Re: Rotarty price mistake I got refunded today so placed an order with CYC for the DAS 6 PRO with the group buy discount

Just disable them, iirc it is ignition on and turn the sidelights on and off about 4 times I think it bleeps at you and they are not manual lights.

Thanks I would like a roof vent but that will not be just yet so I will probably wait until I get that before getting the windows.

Thanks i will will have to look at getting some shims

Thanks for that, I don't want it too lively on the back yet(want to get used to the car first) so if I got some 10' shims and shimmed the n/s/r in to make it 0.22' and shimmed the o/s/r out to make it 0.18' would that be a bit better turn in but not as lively as just shimming the n/s/r in to...