Search results

Wtf happened.

Another late night working on this shed, and the job we started, isn't even complete. f**king Clios.

Will be tonight! Hmm, maybe, sounds better its not fucked now.

Loads of people now think mine is a 172 Turbo. How disapointed people are.

Just checked, They are out of stock atm! My size is... 550mm x 140mm x 65mm, Overall length: 690mm. 2.25" (57mm) Inlets You'll probably need reducers etc for your boost pipes too, I did. I drilled the crash bar to mount, used some studding, used some rubber washers aswell, to mount the IC.

Shhh you. I didn't actually f**k anything, it was already fucked and seems pointless putting something broken back on. Toyosport, eBay circa £50 I think. Yours being a 100 should mean the boost pipes required to link up to the existing pipework should be cheaper, I spent a fair whack on that...

Take the fuse out and you'll see how s**t they go. Even with one or two ABS sensors working, it doesn't feel as s**t as with the fuse removed lol.

If three sensors stop working (for instance, rears unplugged) and one front, speedo will stop working properly, handbrake and stop light come on too.

Many things it can be, incorrect timing can cause rough idle too.

Be easy enough to do when fitting brakes. Good, I told you it'd feel much better. Gives you that bit more confidence. You don't know fighting until you try to drive Robs car fast!

Riding a Motorbike this Friday night (hopefully), and judging from my previous experiance, you'd best be quick.

Gay. I reckon it'll rub if you go lower too.

Re: dmallett's indecisive clio thread! Monaco ph2 pg1+, Titanium ph1 pg31+, PB ph1 pg I don't like engine covers. Painted rocker cover (A good job!), inlets etc looks good. Bin the hoist points.

Non-sports look so good just lowered on 172's. Get the tyre lube off and blacked and it'll look mint.

Hopefully have a reliable car again by then. Driveshaft & engine mount changed by then. Head gasket will be fine! It's only 1.5 bar over factory! Obvioisly have missed how s**t my car is lately. Yes please, no rush now, worry about it next time I see you. I'll probably die!

Can't listen ATM, but what your describing sounds exactly like a wheel bearing. Do you think it comes from a particular corner of the car? If so, jack up the car and spin the wheel, also check for movement up/down and left/right on the wheel. If you have play in both directions, it'll be wheel...

Chances of my car surviving this? Plus the Burpspeed Llandow Trackday.....

Is the two nights Friday and Saturday night, or Saturday and Sunday night? Me and my mate want to stay Friday & Saturday night.

I've slept in my car loads, get the pass seat laid flat, in a sleeping bag, Win.

Don't take apart the ratchet mech. Just grease it. No need to do anything to them really. Seals are the same as fronts etc.

Fronts are indeed easy, but I think the rears are easy too?! Not much different to the front IMO.

Sorry, who did what?..... Yeah, I did it!

I trust mine! FYI, anybody reading this, I'm drunk, so I'm sorry if I make no sense.. Anyway, Yesterday I ordered new front Discs & pads from g172, Top service as always!. Old ones weren't that bad as you can see... Minor lip on discs, pads mostly worn, but I'm not the kinda person that...

Look at you lot, preparing weeks in advance. I'm going to throw stuff in my car Saturday morning, go via tesco, rock up, get my chair out and become dead to the world. Before getting in my car, in a sleeping bag and having the best nights sleep. I'll bring my pop up gazebo too though.

Pointless if your coolant temp sensor works. Will watch it and buy in a week or two, Sorting out some other stuff before I go and break it again!

Thats a resister, it just needs airflow so it cools down, its so the fan can run at half speed with aircon on. I will just cable tie it in place somewhere so its not touching anything but can get airflow. Slimline fan will probably run faster than the old fan, but no biggy.

Its cause its a 65 setup. No intercooler between em.

Non-related IMO, more than likely an ABS sensor come unplugged, or similar. Best getting it plugged in.

Only things you've got to remove is the internal kick panel/sill panel, PAS fluid bottle (which has a nice clip and slides up), and the grill. Its not a bad job to do at all !

Cheers dudes! Yeah I know, Aircon has no gas ATM, so thats no issue, and I've never ever had the high speed fan kick in, temp has never got above half way. I'm sorting out a slimline fan soon.