Search results

It has xenon headlights aswell

What turbo is he going for?

Ive got brand new Centre and rear mounts, rear mounts where filled Full of tiger seal and allowed a week to fully harden/set, yet still the right tail pipe sits lower, no matter how much you faf on moving the mounts round adding or removing washers it dose sit slightly lower, also I found that...

Yeah I regret not going for the btm system now, but I got the piper for £420 as opposed to £500+ for Freds system

Ive got a piper with standard cat, it's quiet on tick over and really comes into its own when giving it stick, build quality is good but I don't like the design of the backbox/tail pipes The design of it makes it heavier on one side and makes one tail pipe sag more than the other, also only 1...

The front splitter is epic, was it a one off or are these available to buy?

Ive used them a few times been ok for me, if you go on there site and log in to my orders and view your order you can raise a question regarding your order and your problem, they will then email you back but youl have to log back onto your account to see there reply Hope this helps

The 172 cup turinies are et38.5 dout the standard 172 wheels will be lower than et40, take a wheel off and it should say somewhere on it? Might be behind the centre cap?

Type it into Google and itl bring up old threads with the answer your looking for

Thanks for the reply, will the inside of the wheel on the outside of the centre bore need to have a angle on it like standard 182 wheels, or is that just to help locate the wheel onto the Hub?

Thanks for that mate, getting it welded in so will need to remove drivers seat get cage in out seat back in then a 20 mins drive to fabricators

Ok seat out it is then, did yours go straight in with both seats out?

Ive bought a rear cage from ebay for my 182, all the interior apart from drivers seat and dash is removed, tried to get cage in via passenger side door with no luck, has anyone got any tips or advice to getting it in? or will I have to remove the drivers seat aswell? Thanks

I'm Getting my alloys centre bored tomorrow as there currently to small to fit onto the hubs, ive searched and found that the hub is 60.1mm on a 182, can any one confirm if that's correct? What diametre will the centre bore on the wheels have to be? And also how long will the centre bore need...

Defo andy at clioturbo!

From the above I'd go with mitchelin or the nangkang ns2r from tyreleader

I think he was actually over 88db but there is a slight leanienssy, there is a sound limit all cars in total must meet but there is only 10 cars on track at once and cars can be mixed about to keep the total within the limits

Is this for the quiet day at croft? If so aslong as youve got a cat youl pass, my piper with cat passed at 87db your milltek will have a extra box so should be even quieter, last time I was there I'm sure someone had a decatted milltek and still passed

So do you think 10mm will be enough clearance on mine or 15 just to be on the safe side?

They are 15" oz super t gt et 37 6.5j

Thanks for that mate, hopefully 10mm will do me

Thanks mate [emoji106]

Ok cheers for that, just bought some brembos from a megane 230 so just need to be able to clear those, so would 10mm do it or would I need to go bigger? Going to have the camber set At either -2 or 2.5 degrees? Thanks

Slightly confused here, et37 means the wheel would stick out less than et43? Or am I wrong?

NorthloopCup would you say 20mm bolt to hub spacers on the front would be ok on track without up setting things? My 15" wheels are et37 and inthink I'd need the 20mm to clear the brembo 4pots off a megane which I plan on fitting

Just bought a rear cage off ebay and I'm going to spray paint it with Hammerite smooth, each can is 400ml how many cans would you say I'd need?

Have you seen the current group buy going on in the GB section?

The tyre wax is sh*t lol search on detailing world for reviews

Just bought 1 of those cheap 160 pound rear cages from ebay and im going to get it welded in insted of bolted, whilst I'm there at the fabrication company im going to ask them to weld a steel bar going across from 1 rear arch to the other to act as a sort of rear strut tower brace, going to ask...

Re: Essesive idle speed Took the car for a slow drive and all back to normal now must have sorted its self out, yeah there is a fault on the rs tuner but I don't have the abs module to see what it is, I was thinking abs sensors or brake pedal sensor?