Search results

Hi all, going to purchase the silverline rotary polisher and also the 3M polish sample kit which includes fast cut+,fine cut and ultra refine, each are 250ml what pads should I purchase aswell? Car is badly swirled up and has a few deeper scratches here and there aswell. is the paint on my...

yeah I did do it inside I'll have to go into another room in the house with better lighting and give them another coat, platinum wheels is ment to last up to 2 years aswell, only reason I chose it over c5 was because I got a merino wash mitt from them aswell I wouldn't be supprised if platinum...

So is it like a cleaner/protectant? If so I have some autosmart tango I'll give that ago if so?

Only issue I had was i couldn't see the sealant on the wheel as I applied, bottle says 3 drops on cotton pad and change to a new pad every wheel, 3 drops on the cotton pad was actually smaller than the size of nail on little finger? I'm worried I haven't coated everything? i don't want to have...

I've just applied carbon collective platinum wheels on my refurbed tuirines I've put 2 coats outside and the inside of the wheel, the sealant bottle is 15ml and I've used around a 1/4 of a bottle, is this about right? I feel as if I've not used enough product? How much have others used that...

Is that a cleanser polish?

My upload speed at home is terrible it won't let me upload a photo, its almost like a corrosion setting in, I.e rough to the touch a yellow/brown colour

What can I use to clean the diamond badge on the centre caps of wheels? The silver has gone tarnished, I've tried APC and no luck will a AIO polish do the trick or will I need something with a bit extra cut? thanks

Cat to manifold kit, message west renault on here they will sort you out

Think ill just unplug it if its fine to do so, I've had the adjuster stick come off before and the actually headlight ball joint and it was a total pain! Thanks for the replies

As hipwell says, use some wd40 aswell

When the car is started there is a ticking sound coming from engine bay on passengers side. i think I've located it to the adjustor motor as the unit on the back if the headlight is vibrating, will the motor be goosed? Just to add while the adjustor motor is clicking the headlight doesn't...

Ok thanks ill do that, so there should be vertical movement or not?

the inside pads on the front brakes aren't making even contact with the discs, about 60% of the discs surface is covered in corrosion! They dont squeal either or make any noise what can cause this problem? They are cheap feodo sl pads and discs. They have covered approx 4000 mile Thanks

Ok thanks, am I right in thinking it should be 128 or there abouts? Also fitted new rear and centre mounts and cat to manifold kit and now my centre box on my piper system is resting up against the heat shield and is vibrating rattling herendously its worse when you lift off as apososed to...

Last night... With old sensor it was 146 then with new sensor it is 152, just drove a 60 mile round journey and average mpg ended up at 32.5 mpg mainly broads aswell however I did reset the trip before i set off

I've read on here that the long term fuel trim should be around 128 is this true? I had a ema light on so plugged rs tuner and it came up with front 02 sensor I observed the love data and it said long term fuel trim 146 fitted a brand new lambda sensor and no ema light and nothing present on...

http://m.ebay.co.uk/itm/331032971731?clk_rvr_id=587033977726&afsrc=1 are these the correct size for front and rear?

Sounds a good method ill soak them a few days prior then use that method, yeah I'll get a set from hel as there stainless steel

It is valentines day ;) lol

Thanks mate yeah ill give them a good soaking a few days before then

What are the brake nipples like on a 182? My cars done 89k? Will they come off ok or do they tend to snap? Thanks

thanks for the link mate

Hello there I'm getting the rear joint removed from the cat on my 182 and getting it sleeved to fit my piper catback system, a fabrication company will be doing it and I'm just taking the cat in for them to do, my question is how long will the new stainless steel sleeve have to be to connect...

Evol-Engineering for the lower gear box mount

Do they come with a new pinch bolt? Thanks

are they normally buggers to get off on clio's?

1 should be fine

Just seen your post now mate and already ordered it. :(

Thanks I'll get that ordered now :)