Search results

your in hands with our friends Chris and Mike :)

i personaly drill and tap with a 1"BSP fitting. I can supply you a Drill Bit, Tap and Fitting on a cost of the fitting and deposit for the Drill bit and tap to be returned. and deposit refunded

​

Here is how hot things got :( £600 worth of rods just in the bin :(

going to sort it out mate, its to much fun, ordered a bosh 044 and a swirl pot today :D

doing the job properly, i.e as i said and as Steve posted a photo its a 1"bsp fitting, sorts the issue sof the return hitting the drive shaft etc, wont leak and is just the way it needs to be done

22.5mpg

There riffle drilled also that's a good thing

Was that u mate,? I think I met you up there

Good lads thomas

Dont drill the sump, do it properly and take it back In to the block,

As chip said, I got a refund on pump, but that was only cos I went mental with the lads,... No I've not been to Manchester, was I Bolton a few weeks back.

Rev limiter is set to 7200 but we developed a misfire top end due to a coil pack issue, so we aborted mapping and stuck a 6500 rpm limiter untill i can get it sorted, i have sent the ecu back for repair and had had it adjusted to run the OEM renault Coil pack at the 20vt ones are expensive and...

Brembo carbon dot 5 fluid motul, with ds2500 pads, with a adjustable bias never ever ever had issues with break fade even on track,

i had a issue and had to smash the grill :( ​

mines to low, and im sure its as high as it goes on the rear LOL

Georg!!!!

Steve I have clip, drop me a line

Good friend of mine Mr pye... He'll of a rally driver local to me also

Please don't say eclipse performance. Lol lol in advance

Good lads, and he uses a top notch lad to do the belts B-)

£46inc postage

Thanks boys I'll be in touch

Hotel all the way, lol we arrive Sunday and go home Tuesday well be in a nice EVO 8 Mr

I'm at the ring this same time

Hi Guys. My wife got me a HP Envy Dv7 Laptop for Xmas, with Beats Audio. and i am very very disapointed in how slow the thing is and how oftern the thing freezes. It has 8Gb Ram Intel Core i7 2.4Ghz 1TB HDD Windows 8 can any one help me, i have Office Installed and thats about it, i tend not...

Will do that tomorrow happy days

The resistance is different from a ph1 ph2 I modify the oem phase 2 to take a return line. It's easy and makes gauge read ok

Yes the coil pack, remove a plug, fit it to lead and turn over check for a spark on each lead, this will rule out plugs and coils pack. Once that's done if all is ok put back how it was, then pull fuel pipe off and get a bottle put the pipe in, get a mate to crank it over, when you turn...

Ones a vent for the tank ones a feed, that's defo a fuel regulator it's a late ph1172 mate, your fuel garage won't read correct with this fitted either.