Search results

carlube from asda?

first bridge photo - the iso must be at about 3000 second one - much better, if you uad taken the photo a bit lower down it would have been better. you'll pic it up over time

the brown plud needs a resistor in it as that is for your pretensioner as for the black plug i'd need to check but i cant remember it being in my car lol

lol'd

are all trophys not 55 plates as well? lol

awww. LOL

standing bolt upright won't help either rule of thumb: the lower you get the better it'll look lol

no you don't have to re-locate the battery

Adam. on here has a camera installed its got him out of the s**t so many times. he is now banned however you could PM him lol

v6 has one big hole standard one has two smaller holes v6 box is better

might be an idea buying spacers for the front i have 10mm on the front it improved my turning circle quite a bit as well lol

i used to put it in manual and f**k about loads but never really got anywhere now all i use is the "AV" mode drop the f stop as low as possible then control the shutter speed using by adjusting the iso obviously you want the iso as low as possible to reduce the grain effect on a sunny day you...

mick what do you mean?

you'd be surprised usually spend £15 on petrol end of night i'll usually get between 60-70 so at leats £50 to top up the car for the rest of the week lol

did you buy those wheels from clio_stu?

Don't even get me started on this! £880, fully comp I HATE WOMEN

its a very expensive one, unless your an asshole called stu only then do you get them cheap...

it is correct. i shall be in attendance

did someone hit you over the head with a burger?

ive just bought an uprated mount from prima racing only heard good reports about it. looks good quality. for a cheaper fix you can jam a 19mm socket in the bottom of the rubber and use cable ties to secure it in place. this works until the cable ties snap and the socket falls out.

love the colour. first time ive seen petrol blue lol

tickets ordered

buying a burberry radiator from john. Cheers anyway

does anyone have any idea how much a new radiator will be from Renault? ive got a small coolant leak coming from the nearside of the rad. was going to use rad wel but the rad has a bend in it from a previous owner so i'd like to replace it anyway New rads from dingbro/gsf/euro car parts are...

when i took the clocks apart i checked inside both sets. both sets of clocks has the same amount of SMD's in the same places. im just assuming that i need to run a wire to the multi plug to make the shift light, light up. anyone else tried to fit a shift light?

i have a y reg 172 i understand that the x reg 172's came with shift lights. If i fit the ecu, multitimer and he clocks the shift light doesnt work. Does anyone know if there is an extra wire that needs run on should it just be plug and play. any advice i would be grateful of

Was speaking to someone in the scrappies to other day. (this scrappies buys and sells cars as well) he was looking at a BG ph2 with white roof and grills etc. (chav wagon) i heard him say to his mate: we could put it on track! i replied - i wouldnt buy that the old owner wrecked it him. aye they...

black on black wheels. i came up behind you on the road past the univeristy. (silver 172) noticed CS sticker on the back window

you got any pics of where i'll find it? i found a switch but it would probably be easier to get to from underneath. only thing that made me think it wasn't there is that i'd have to drain all of the gearbox oil when i removed it. thats the french for you though haha what other earths can i try...

When i put the car in reverse the two reverse lights come on but they are flickering then after about 3 - 4 seconds they completely go off. I've checked the earths just below the clusters but both of them were fine. could it be the switch on the gearbox? If so is this switch on the bottom of...