Search results

just reading this thread is interesting....yet to get a comparative RR done (as it'll be a different RR for the before and after so i doubt it'll mean anything anyway) but.... Rather than RR BHP figure I go on a repeatable 20-100mph time. As Long as the weight of the car and weather conditions...

nobody seems to have clarified if it's water or oil temp you want to reduce..... if you're going by the standard gauge then i presume you're after water temp reduction.... Oil - you can get an oil cooler fitted, although this will only really make a difference on long journey or high rev...

ITG are the Manufacturers of the Maxogen - they do Panel filters, the maxogen is a closed IK, made out of carbon fibre. That's the best to go for.... Reading your post though i get the sense that your not fitting a IK for performance reason, just noise.. is this the case? If so just remove the...

Matt, it falls on deaf ears....

:bump:

i didn't have the blocker though, or thought i didn't, found it loose in the bottom of the green box, this it must have fallen out when i opened the package as it can't have got in there any other way. Didn't see the part in the instructions where it said to block it off at the plenium...

just force it over - loosen the clip first!

all done, test drive has revealed a just over 1 second improvement on my 20-100 time! was a rough time done a wrist watch but hell that's a reduction of a 10th... feels a lot more responsive, noise has become a bit more 'growly' but it's hitting the change up points a lot quicker.... next...

undo the clip as much as you can and just force it back over, 5 mins job tops. it'll eventually give in - try taking it off completely and putting a bit of wd40 or grease on the hose entrance, not alot though! just to help it ease on. once on do up the clip, easy. unfiltered air = bad for...

the bung is no where near large enough though in diameter to plug the end of the plenium, it's about 1.5mm across, it needs to be around 3mm to fit where the tube is...... i've just used insulation to plug the end and secure it to other tubes.

Re: Maogen fitment ahhh so you remove the entire tube..... instructions didn't mention it... i have a little stopper, looks a bit small to fit the plenium but i'll give it a go.

Re: Maogen fitment :bump:

after fitting, i'm left with this tube... anyone know what should be done with it? http://i145.photobucket.com/albums/r220/Cueballzero/DSC00014.jpg http://i145.photobucket.com/albums/r220/Cueballzero/DSC00015.jpg it connected to this...

does anyone on here have the beovision 8? if so how do you plug hd equiptment into it? or anything come to think of it......

only just started thinking about this - is there a difference between a hd ready tv and a hd tv? i cant find a hdmi cable point on the tv so how would say sky hd connect to it?

dang, beat me to it...

what about these 2? http://cgi.ebay.co.uk/MEMOSCANNER-OBDII-EOBD-CODE-READER-SCAN-TOOL-ALL-MAKES_W0QQitemZ260206934511QQihZ016QQcategoryZ30921QQssPageNameZWDVWQQrdZ1QQcmdZViewItem...

looks like the soft version, best exhaust out there for the 182, bargain.

Just want to point out that the Trophy is a 182 cup with better suspension, lower, more supportive seats, lighter & stronger alloys, heavier and larger spoiler, different geometry and only came in red. Every Trophy started life as a 182 Cup! It was not intended to be a track special, it was...

I believe this to be the case. Never accpet their first offer, it's usually £10% down on what they'll go to.

wow, only just heard that it'd been knicked. Two mins later i find out it's been found, then i find this thread.... bit behind the times..... glad to see you've got it back... hope you find the culprits and give them a right good hiding, if this was mine their bodies wouldn't be found....!

Not all the time, F1 don't for several reasons. Mine are endurance tyres, harder compound but last longer.

in the words of stevie wonder, that looks fantastic. i mean gash....

45's will be fine, that's the standard size for tyres on 16's for the clio. I run 55's on track.

i want to turn off the engine emmissions light, so only need the cheap one, anything that lights up that they can't turn off means a visit to either the stealers or a decent garage anyway.

Phone them.... my issue with them was that they didn't have any in stock and kept saying "next month", which never came...... I had 3 suppliers of CLio2 bonnets in CF and two of them stopped selling them, leaving only k-tec. I never like it when someone corners the market like that as you're...

Does any one know if any OBD2 reader will fit the clio or do we need a specific one?

don't hold your breath on k-tec, i waited for 3 months for them to pull their finger out, this time last year. lost patience in the end and went for a OEM one. :(

that's marco's i think.... http://cliotrophy.co.uk/forum/viewtopic.php?t=4517&highlight=

has anyone used it, if so what's your opinions? Also, is there a similar product that's better?