Search results

Tried connecting my Android Torque pro app to the ELM327 OBD2 adaptor, and it connects to the OBD 2 but not to the ECU Any ideas? - had a couple faults on the OBD reader, which clear themselves suggestions rather than using the ELM 327 adaptor interface

i may be popping over to Hastings then

good to know how you get on with that bolt. I'm collecting a roll cage over weekend, and after my MOT early May the rear seats are coming out too, and guessing i'll battle this bolt as well Be handy to see how you deal with it

if only you could get away with a bit of sticky tape....

Let me know- might join you.

you certainly are giving it the full works, bought mine for £600, spent £650 on it (Inc 300 for tyres) and i'm pretty much ready to go on the track. Lydden, then Brands then Donnington atm Bet yours will be fab- you touching the engine much? or exhaust manifold?

my phase 1 12v cigarette lighter socket shuts down after 30 seconds- thats where i power the dash cam from

Thanks for replies Yes- have aftermarket steering wheel. Last years MOT failed it under SRS light indicates a fault (Red airbag light on) Owner then resistored out the airbag light, and it passed MOT with advisory "Warning lamp does not illuminate" Checking the go.uk MOT website, it says that...

will it fail with just the SERV on, as the airbaglight has been resistored out i guess, and is off, on mine SERV has been on ever since i bought the car 6 month ago, and nothing else is wrong (Oil etc) Prob go in and ask before the MOT in a month

Blimey- think i was next to you.....

as said, even cheaper cameras have motion detectors

haven't explored that part of the car as haven't taken the fitting off, but very much doubt it. will be a new bulb holder that fits into the light unit I would have thought

I have volt meter that will show 12 volts is flowing. IE 2 probes, one on the live wire, and one on the other return cable on the connector. If you are getting 12v across the 2 wires that the bulb has plugged into it, then it shows that 12v is getting to the bulb, and then its the connector...

use a bulb that you are absolutely certain works, check the return path (Earth) then the connectors/connections. Conectors were knackered on my upper brake light recently, so by passed them and cut them out if you have a live switched supply, and return path and a working bulb, theres nothing...

I went to a "cheap" place recently for powder coat blue... they waned £90 a wheel. Ha! Searching for nice colour blue rattle cans atm, unless anyone knows anywhere in the South East

how level does the ground have to be when filling gearbox oil I realise you cant be on a bleeding hill, but should be OK on a slight incline Its either on a slight incline hard stand next to my house, or out on the street which i dont fancy Could drive onto a bit of 4 x 2 i suppose... wheres...

Managed to make two extension ramps, to get onto my car ramps, and they worked. Now got the tarmac marked up where the ramps and 4 foot long extensions go, happy days Simple things :blush:

I left round 1.30-2pm as had to get back before 6pm, so yes probably was me spose i shouldve made the effort for the meet point at Chievely- would have had to leave b4 5.30..... No worries- next time

Saw a blue 182 with a smashed front wing at Castle Combe last Saturday?

i did pop back to see if anyone was on the stand, but nobody (Cant blame anyone) there hangin around I even approached a couple guys, but they werent from Cliosport. Ha-ha Maybe have someone there at a meet time, like 12noon, or every on the hour, just to have a 5 min chat Good show, thanks for...

Anyone for East Sussex still needed?

Looks like only me for this (And the wife n couple friends) and have now booked to sessions (£20 a sesh) Anyone else interested? Could park up together and swap Clio stories? Lets hope weather is as good as it was at Castle Combe today

Seen a few Clios at Castle Combe today with NO rear bumper, and one with NO rear bumper and NO front bumper too Dont like the look, but does it really help air flow? Like the 2 inch holes though... but again, only for looks?

Parked a bit away from u guys in T5, bout 100yds further on toward HD1 pitches. On a bank. CBA to wait ages As usual, parking carnage. Lol.

Yep- I'm certainly looking forward to my 5.45am alarm call ;-) bring on the weather, and maybe even a late track sesh booking....

Well- got it working. just posting in case this helps anyone in future I couldnt get any of the 3 upper brake lights i had working. the connectors all looked a bit naff and broken and corroded. So- cut them all away and connected the 2 cables that appear from the tailgate straight into the...

And then take a 12 stone passenger round the track!

<3 decals. mines covered.

Lol- Get a free shirt when you pay £25.... Will be there, but going in the R, and probably on the track too. Been last few years, fave show of the Year Loadsa peeps and cars

i thought there may be a fuse somewhere, (Connector block) but thought someone on here would av suggested that i am wondering 1. the connector that connects to the brake light terminal has broken wire (But i shove tester terminals in the connector and that what shows the 12v switched live) or...