Search results

They can leak as there is oil and gas inside.

You can fill out one of these https://www.gov.uk/government/publications/complain-about-an-mot I had a car fail on items i knew where a pass. Vosa call you up and book the mot at a local garage near you at a time you can drive the car there. They retest the car themselves(ministry of transport)...

Rust = car Aids

The straight bar should be held in place with alen head bolts, but the captive nuts are welded to each tail pipe this is how it should look, sit.

Wtf is that on the right silencer? Should look like this Also where its leaking at the join you can use black rtv to seal it, dosnt crack like exhaust paste. Could do with a new genuine renault centre exhaust mount...

Thats not what the exhaust should look like with new rear mounts, very strange put up some pictures of the mounting points,you shouldn't have to bend the hangers.

Probably got a slow response time now.

Oh right, that one will have a different date stamped into it on the inside if its new.

The passenger side rear has had a new wheel fitted buy the looks of it. The reason i can tell is i bought a new 182 wheel from Renault to replace a curbed one and it was lighter than the rest and made the center cap look dark. I returned it for a refund as they sent pictures to Renault UK and...

There rubber for a reason.

You can only get pirelli p zero nero gt now. http://www.tyrereviews.co.uk/Tyre/Pirelli/P-Zero-Nero-GT.htm http://www.tyrereviews.co.uk/Tyre/Michelin/Pilot-Sport-3-PS3.htm

Mine are both rolled, all mk2 sports should be from the factory. Could of had a new quarter panel fitted or they forgot to do it when new. Page 44 here http://www.phoon.co.uk/cliosport/Body_Work_0558A.PDF

Yellow is 70A Shore Black is 95A Shore

http://www.cliosport.net/threads/diy-stop-that-irritating-climate-control-buzzing.684354/

http://www.allcarpartsfast.co.uk/renault/renault-8200324912-support-rear/

Fake meaning 1.not genuine; imitation or counterfeit. Fake air max http://www.ebay.co.uk/itm/Fashion-Running-Trainers-Absorbing-Air-Max-Skateboarding-Shoe-Men-Sports-UK6-9-5-/122143411397?var=&hash=item1c70508cc5:m:m9-a5QnngsBV8iN0fT1BgjQ The picture shows IWP042 W stands for weber this has...

FAKE

There bad, the scorpion RS192 sounds fine.

Scorpion now come with the flexi joint = no more cracked welds.

If the coolant is running out of the weep hole and staining the water pump body then it needs replacing. If the weep hole is just wet then you can just keep a eye on it.

They would of had to removed the aux belt to replace the Cam belt so probably bear garage unless someones been in there since.

The reason the aux belt has started to split is its 1 rib off on the pulleys so the edge cuts into the belt. That will be down The reason the aux belt has split is that its 1 rib off on the pulleys. The lip will cut into the belt,its caused buy the wancer who last fitted it. Should look like mine.

SKF OR SNR are the best ,avoid vetech/orbis own brand rubbish.

More down force onto the rear axle to increase under steer.

Could be the rear main seal or the sump gasket. http://www.cliosport.net/threads/oil-leak-advice-needed-pics.639854/

check out this could be the rear main seal or sump. http://www.cliosport.net/threads/oil-leak-advice-needed-pics.639854/

Yep forgot i fitted the full nut it was 5 years ago the manufacturers modifications are even worse than the originals like you said.