Search results

Mine had that issue, and while troubleshooting we noticed that the hvac control unit was non responsive. I bought one on ebay, and the problem was solved. It migth not be the same issue, but if everything else fails...

It sounds like a problem on the control unit. Next step, I would plug the car to the computer, and see if the software can reach the hvac controler.

I have a module in my car, that closes the electric windows when triggered. It was part of an alarm that the car had in the past.Without the alarm it doesn't do anything. If I could find this feed, it would be pretty simple to get it running again, closing the windows upon the moment when the...

Hi! Is it possible to get the feed from central locking, but only in the case when the key fob is used. Disregarding the interior lock button and the auto-close when the car starts moving. I have a clio 2 ph2 172. Thanks!

Well, after some experiments, turns out it is some kind of optional module to receive an input from the alarm and shut the windows. Mistery solved. The only thing I'm unable to do, is to remove it, since I'm unable to make the windows work once the plug is pulled.

Hello! Last year I bought a clio 172. It was advertised has alarm equipped. Turns out the alarm was not functional, because the siren half as got missing..... yes you read that right. So since the inside unit wasn´t doing anything on the car, I unplugged it from the wires and pulled it off. To...

Yours is manual, so no servos to control. In any casy, you should check if the second steel cable, the one that goes to the orange(insh) piece of plastic is working when you move the heat selector.

Even with the AC off? If so, either you have the same problem as I do or you have the most common problem well described is this thread.

Mic for models with handsfree kit factory fitted.

Hello! This thread is priceless. But after sorting the same problem that most users have, a new one has appeared. Basically my car only changes the servo position that controls the flow of hot air when i turn the ignition on, it changes to the defined value and then it will not move again, even...