Search results

iPhone has to be running iOS 8 and your Macbook has to be running Yosemite. You need wifi and bluetooth turned on on both devices.

If you still looking for Beta testers then let me know :)

What version are you running ? I have Fusion 6 and that works ....

Its Apples self destruct feature, its them making you go out and buy a new one. p.s get a 2013 Retina ;)

I run Fusion and have seen no issues at all. Had to update a couple apps but nothing I would not have expected

Had a couple issues on first install but once all updates were completed it is fine. Nice and clean OS, like the feature of being able to share screen in iMessage. I still feel that iCloud is broken but 8.1 might finally make it work lol

Take it for a good blast then see what it's like

Checked the fuse to the starter motor ?

Just about the say check the 5amp sure inside the passenger door panel fuse box. Blew it when changing the stereo on the 182. That 5amp fuse controls ECU and UCH power so nothing works lol

Clio sport 172 with Aircon is around £600 at a specialist with all genuine parts.

Remove crank sensor, clean it and then refit ... Try starting it without the air filter fitted

Yes if you remove the jets and stick tape over the holes. If it is fitted, it has to work. Can't test what isn't there

Yeah I used high tensile bolts with washers and lock nut

Had similar issue when doing my clutch... Threads were completely gone and just spinning the nut. Problem solved.... Will see if I can find what size it was I used as I can't remember off the top of my head...

Oh a rebuild at least if the casing isn't damaged

If it's a dedicated rally car and your budget allows for it then do it

Undo the 3 bolts holding the driveshaft cover to the box on the passenger side and have a look at the Circlip. Welding it in isn't the best solution ....

Remember a paddle clutch is more like an on off switch. Unforgiving driving in traffic

Not as much of a big job as it is a s**t one...

Should be a couple of us there if you want to come mingle.... Nice to meet some of you...

Ignore the last post as I have read the follow on. Did you torque the hub nut up to 175nm....

Your handbrake needs adjusting for a start as it should spin freely. Try removing the calliper and see if sound continues. Could be a pad loose in carrier

Yeah I checked and they are 50nm. Like is said mine were done up with an impact gun so I can't see them being loose

What is the correct torque setting for these bolts ?

Had one before and had to put it in a press. Ended up using 5 tonnes of pressure to get it out

Wouldn't bother changing parts until you have had a fault code reader on it as you're just be wasting money

Engine management light on ? Get it plugged In and read stored codes ?

All that power to spin up one wheel [emoji6] Needs an LSD

What I'm here for [emoji5]️

https://www.dropbox.com/s/uqfxfkn2nagxfmx/Workshop%20Manual%20-%20Manual%20gearboxes.pdf?dl=0