Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Top engine mount has been renewed, it's a vibratech one been moved it's not the engine knocking. (It's got a washer in the belt cover piece too).
It's the creaking when turning, likely to be topmounts, but running out of ideas..
Can springs be potentially a reason for noise? It does make a...
Such a common problem on these cars but I just can't rid of mine.
The noise started with my ktec solid top mounts and I thought they had been damaged on potholes so they have been swapped out for standard top mounts with the washer spacer (just in case)
So it's the usual pulling away makes a...
@leeds2592 It wasn't too bad a job.
I removed the horn from the wheel/wing area and threaded the wiring back up through the engine bay to the front (there is enough length)
Then added new spade connectors to the ends and then it was pretty much plug and play. (I did change the fuse to a...
Tonight I planned to disconnect every wire and the tubing, spray wd40 into the compressor.. Set up the wiring and tubing so it looks neat at least... then try again
'Was'.
Dixie horn has now been replaced with this: http://www.ebay.co.uk/itm/150DB-Super-Loud-12V-Single-Trumpet-Air-Horn-Compressor-Truck-Lorry-Boat-Train-/271847239635?pt=LH_DefaultDomain_3&hash=item3f4b5bafd3
Dixie horn did work on same setup and that required more power..
Hi I've got an air horn with tubing and air compressor that sits in the car engine bay.
I've not had a chance to give it a proper blast just a couple of beeps (it's very loud and you can't really keep beeping it).
The last time I used it, I then parked up minutes later to the cinema then...
I do have a spare gearstick but was informed today it doesn't look like there was any problem with it. I may swap with my current one though, just in case the bottom part attached to selector arm was bent too.
Is the gearbox side lift up piece boltable or a solid piece
I had it taken to 2 different garages and both have told me the gearbox side/ lifting piece is too slack and despite all gears being in the correct position it's too loose to connect
For about 2 weeks I have had no reverse.
Started off went over something like a large rock, brick etc in 2nd and it bounced the gearstick up, and causing 1st to be difficult to get into.
I didn't realise I had lost reverse until getting to work.
-----------------
Underneath, the gear selector...
"French crap, just going to fall apart". "Slow piece of sh*t buy a fast car"
And then it keeps up with his 350bhp turbo 2.5L... After being quicker than it in acceleration 0-80 on a private track
Then he spends £1000s on resprays for trim yet I can buy all my parts for less than 1k
PVP you earn like £16,000 per race. Or £2000 for every landmark you go to etc.
Bought the koenigseggseggseggsegg recently it's alright. Want a Hummer though
My fave game cars are 1299 focus rs dirt, performance skyline and street golf. f**k the raid buggy and circuit dodge viper