Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Sorry for not getting back to you sooner. I am having problems uploading a picture. However the relay was located at the front of the HVAC assembly behind the climate control panel (if I remember correctly, as I said I've moved mine). The relay is a black 3 pin with a grey connector, similar in...
I have a Phase 1 172 which has a fairly large black 3 pin relay under the dash/centre console (in the centre somewhere, can't remember exactly as I moved mine) which I believe is linked to the immobiliser system. Have you checked this? I have only ever seen it fitted on Phase 1.
Hi all,
Does anybody know if the brake servos are the same on all Renault Sport Clios and if they are still available new from Renault still? The part number for a Cup is not recognised on the Renault parts system. Thanks
Has anybody fitted these coilovers to a MK1 172 (or other 172/182)? I'm having a problem with the dust covers/bump stops not sliding freely through the plastic spacer between the main spring and helper spring. This has already resulted in the dust covers being damaged. Also I cannot set the...
Thanks for the reply, I have looked on these and other sites without success. I'm planning on contacting them directly, just wondered if anybody knew where they were easily available.
Does anybody know where to get new wiring pin terminals/connectors for MK1 172/172 Cup? I'm building a bespoke harness for a track car. I'm looking for front/rear light units, UCH/door pin switches/decoder ring, engine ECU/sensors. I've found some through Renault P/N 7703497348.
Any help greatly...
If it has PF1c (clockwise) or PF2c (anti-clockwise) stamped on the side they are available as a kit (inc new connector/pins) from AT Power for £40 plus shipping.
Hope this helps.
Had this problem on my Cup, check O/S/F engine mount (rubber inner part) is aligned. Changed the engine mount on mine to cure it. Have raised mount using washers under bolts on a higher mileage car to cure noise. Hope this helps