Search results

I fitted 182 wheels on my DCI last year and used the same bolts, no problems. I had to replace all the bolts because some were faulty and snapping inside the hub. Ordered some from eBay for my car, but for some reason the cone head extends too far into the shaft not allowing it to tighten...

OK, cool. I'm considering the 25mm ones, but then thought, as the suspension dips, if they sit perfectly flush with the wings, wouldn't they collide? Are there any pics of 182 wheels on a rep with 25mm that someone can show me?

What's the risk if I over tighten the bolts?

Thanks looked into Delta Mics, much cheaper than the brands above? When fitting what's the procedure, is there any treatment required, like greasing etc before fitting? I'm considering the 25mm as I'd like them to not go any further out than the arches, I want to get a factory look as much as...

Thanks. Had a look. With the unbranded ones there is a huge difference in price of about £50+ Perhaps if I'm going to spend a little extra, this will be parts to spent it on (and probably the arch liners, if I can't find any second hand ones)

The headlamp has the ballasts built into the unit. You're just supposed to plug it in. I think I might have figured it out though. But I have one question - does the driver side main light have its own use separate fuse from the passenger side? My existing headlamp lens is cracked in front of...

Yes, that's the plan. What brand names would you suggest I look into? Are second hands okay?

Been looking at the spacers for 25mm. Looks like its going to set me back about £100-£130 new. These are for the Eibach brand. Should I consider second hand ones if they're available? I'm just worried incase they might be damaged somehow and might send my wheels flying off on the motorway where...

No, DS2 I believe. They work with the 182 projectors.

Found this thread: http://www.cliosport.net/threads/how-simple-to-fit-xenons-to-1-2-16v.732936/#post-10107647 Seems like it should a direct swap. In this case I'll pick up some new bulbs and hope for the best.

Bump!

So I'll need to buy the rivet gun and the correct drill bit. How are they removed if I need to take the brackets off?

Thanks that's helpful. It looks like from the images that onces the brackets are in place, they can't be removed that easily. I think I'd perhaps like to use a combination of rivets and a seal. The idea of drilling holes is a little scary still.

Bump!

I was given the wrong information then. What needs to be done?

The ballasts and the lot are fitted to the headlight so yes everything is included.

I picked up some xenons for my dci about 2 months ago. I didn't have time to fit them immediately because we were just moving house, and have just got round to try one side yesterday. My understanding was that they were plug and play. so I disconnected my old headlights plug in the two cables...

After getting the 182 front bumper I realised I had the get the accompanying wings too, then I considered the side skirts to complete the look. I don't want to drill holes into car due to potential rust issues. I have been advised with a seal instead. But I have some slight hesitation in case...

Yes I have the 182 Wheels..

Is switching the rear (or front) beam more expensive than getting the spacers? On the sport models are the front and rear wheels the same width apart, or are the rears ones closer together than the front? Just seems a little weird to have front and back at different measurements apart in case...

Bumpy!

Can't I install these stub axles that are required to bring out the wheels? I have the rear bumper as well, but I suspect this is the same size as all other models. I think it'll look a bit weird if the rear wheels aren't modified at least a little. Any brands to consider or avoid? I was...

I have obtained a pair of front wings from a 182 along with the bumper ready to fit to my DCI. I know that the wings are more flared out than the standard ones, thus I've been looking into hubcentric spacers. As they come in various sizes, how thick does it need to be to sit nicely with the...

I have heard that this is a common problem with the sunroofs. It have localised it the plastic clip that opens the sunroof up. I can't see how I can fix it though, has anyone achieved this?

Is the rear 172 bumper the same as the DCI? Your DCI rep thread is impressive, you've implemented a lot of things I want to do with mine, cruise control (I do 1K miles every fortnight) and the digital heater, but I don't have the know-how to do it myself! have you installed AC?

I picked up the following parts for a 182: front bumper, wings, side skirts, rear bumper, side door strips for £150 - all in black, albeit a different shade. I've also got the darker 182 wheels fitted.

Had a look, interesting looking exhaust. Only problem is its almost £500!!

So where is the spare wheel located on the 182? Any chance you can post a look a like one? Will it actually serve as an exhaust or just be there for show?

Exhaust For the 182, is the back twin exhaust compatible with the existing DCI setup? Would it be just a case of disconnecting the rear back piece and attaching the twin pipes (building a 182 rep)? Gearbox My current de-acceleration isn't very smooth when lifting foot off the accelerator. It's...

I've already got some 182 ones hold, sorry. Is the back twin exhaust compatible with the existing DCI setup. Would it be just a case of disconnecting the rear back piece and attaching the twin pipes? Also, is the digital climate control system compatible with the dial ones? Had a look at the...