Search results

Are these any good as a kill switch also what the hell is the 4 terminals on the bottom for? http://item.mobileweb.ebay.co.uk/viewitem?itemId=270789611879&index=4&nav=SEARCH&nid=36903976002 I've seen a few cheaper ones on eBay but the amps seams low so can someone point me in the right direction...

So these kind of fuses and holder? http://www.thetoolboxshop.com/mega-fuses-and-holders-148-c.asp

On a track car a bad idea dude, It will cause extra strain on your wheel bearings and possibly on other parts.

Cheers guys. Something you learn everyday ;) as you can tell i'm not a electrician, I was going by the kit i bought as it never had a fuse or fuse box with it. So i take the comment back that you don't need a fuses.

Cheers 172ben Surely it will pop the fuse in the standard wire 1st.

Yes but the only way u'l ever get that fault to ground (or short) if it ever slices the plastic protective coating am i right? And if that's the case do the standard wires in the engine bay have fuses in?

Why do you need fuses? All your effectively doing is extending the Possitive cable.

What i'm going to do with mine (fully stripped shell) is place the battery standing up at the rear of the of the Exhaust tunnel (behind the seats) and use a alloy bracket to hold it in place, this will also allow the cable to run in the centre of the car so good for centre weight distribution...

It was confusing me also the guy from Rsport when i was getting parts for the suspension. Good luck and hope you dont get a headache like i did.

Here you go Toastfrenzy

2 way dude. All the terminals that sit on your existing battery (+side) would bolt on the one side of this and your poss cable running to your boot will bolt on the other side.

You could do with one of these in the engine bay for the poss cable. http://www.demon-tweeks.co.uk/Motorsport/Electrical_Components/Wiring_Connectors/Auto_Marine_Power_Jointing_Boxes/1283/1294 You don't need fuses just the stuff bellow 1 junction box (engine bay) 2 thick Possitive cable...

^ I havn't had any problems with mine. As long as you elongate the hole upwards/downwards it won't affect the camber.

Be stronger to help with the extra level of grip also to take the longer and thicker drive shafts iirc

The motor factor's don't list a fitting kit for the cat/manifold join on 1*2, it's genuine part only

Yes this can be done. What i'd done to my cup racer suspension (65mm spacing) to fit my cup packed (60mm spacing) was file the top bolt hole (elongate) and spot weld 4 washers on the inside to take up the 4mm extra width play. All you'd have to do is elongate the top hole and spot weld washers...

Ah didn't know that cheers tony :). Here's the pics of all front suspension/arm components much better quality now.

Don't they use normal 172/182 wishbones as they use a extended lower ball joint (no10) to give the camber they have. Here's pics from a email i received from Rsport a few month back. And by the 2nd pic the bearing size is 40/86/40 Part no 77 11 155 298 Sorry about the quality i'll forward...

If it states that dimmension and it isnt, Why don't you take the bearing out and go to your local auto factors and try and match it up with a Renault part. At least that way you'll know what hubs your running post back at let me know ;). Have you spoken to Rsport's? How about the mk2 laguna's

I might be wrong but don't they run Laguna hubs? If not you might be able to narrow it down slightly as my cup racer suspension was 65mm bolt spacing on the bottom hangers.

Amazing!

Some of these are real footage, but some are made up as advert's to get people to slow down.

Pmsl, luv the stupid puns. Can't wait for the next episode of knife guy and riot Sheild man.

Ghostrider is the current bike rider called patrick from Sweden apparently this seams to be true. Although there are loads of rumours stating that their has been many riders with the 1st now dead and the current one is called patrick. If you havn't seen anything by them/him type...

The car i regret selling was my Golf GTTDI even though it was a 110 i replaced the turbo/intercooler from a 130 with a custom remap end result was awesome :). Sorry about the pics The car had quite literally come out that morning from havin a full respray for run to the sun back in 2008/2009...

Yes your right dude. http://www.demon-tweeks.co.uk/Motorsport/Seats_Accessories/Seat_Mounting_Frames/Demon_Tweeks_Subframe_Mounting_Kit/1763/0/13671 They want £56 delivered, as usual rip offs.

No i bought them from a local rally preparation about £42 per side. Here's the pic's anyway. Sorry about the quality of the pics, but you get the idea.

Hi Neil, I'll get a pic of my one's tomorrow. If there the same as your thinking be prepared as there a pain in the arse to fit.

Na I'm too awesome going by what englebert thinks :). Lol

I can't read the clipping from the paper (iPhone) will do when i get home. If my story's not true about him being caught, have you ever thought that this Patrick dude could be a decoy to keep the police/SAS/Taliban lol from finding out the real identity? Also another possible senario after my...