Search results

stiffer springs. roll bars only help to keep the wheel on the ground.

408 bottles :)

book time is 3 hours.you will need the alignment done after too.

got hold of some Reload and want to try it against C2V3 side by side on my car would 3 coats of each be better? going to start off with a strong APC mix,wash,TRIX,wash,clay,wash p1 then tough prep then reload/c2v3 dos that sound the best way? do i appy reload the same way i apply c2v3? can i...

i want one for my k4m :)

done 21,204 miles since 13/4/2013 thats a minimum of £4,240.80 in fuel :eek:

run my k4m with a de cat with the lambda sensors still fitted and connected without the light coming on. recently i noticed that ive ripped the connector off so the lambda is disconnected and still have no light on.

check the tyre pressures. get the balancing re checked too

a lot come from Europe where there tyre wear limit is higher and there are some places where all tyres have to be the same brand. had a guy come into work with a unrepairable puncture had to replace all the tyres on his car with the same brand as the ones he had on are not available . how many...

can Reload be diluted like c2v3?

or run them on a septate circuit with a toggle switch.

a shock wont have any effect on the hight only the springs will.

thanks thought it was.

working fine on my phone and laptop.

got a yellow plug hanging down from behind my heater controls is this form the stereo? display? or steering wheel controls?

as said check the spacers are the same and fitted correctly. check both rear wheels are the same offset. swap the rear wheels over see if it changes the spacing on the rear. in an old cavalier had a guy in a rover hit me square on the rear wheel managed to push the axle over a good 25mm so...

yeah didnt buy any at that price. will get 5l of prewash soon that i can dilute.

cam seal gone its just sealant no seal. the cam cover also holds the cams in place so will require a cambelt change at the same time.

rds in my local asda sainsburys and morrisions was £6 when i went in on monday. morrisons had wwhw for £4

checked with Gtechniq its fine to clay a window with G1 on so will be giving ago tomorrow see if it will help.

thanks would a refurbished karcher K2 pressure washer be good value £45 delivered

Re: Cli0 1.2 sport 07 plate failed MOT Track rod ball joint excessive play - dangerou if you want to take the car to another garage to be repaired or home the garage can not stop you doing so as long you have paid the bill for the mot or work do prior to the mot that the have done. if you do...

possible the garaged damaged the abs ring on the drum whilst removing the drum or the sensor when fitting/adjusting the shoes. would phone the garage and get it back in for them to check/fix the problem if its down to them damaging a part.

http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_845939_langId_-1_categoryId_255231 any good for the price?

will give claying a go cant make it any worse. will test an area first see what happens. wont use iron or tar removers directly on the glass was thinking more of the overspray and run off whilst washing it off.

want to use tar x and iron x on the car as want to change the sealant ect so will spray the car probably get it on the windscreen ect. G1 isnt working very well now after 4 months tried glass polish made no difference so thought claying may help clean it.

would using clay ironX or tarX on a windscreen with G1 on remove or damage the coating?

fixed my coolant leak

sounds you could have a faulty alternator. if you dont have tools to remove the battery terminal remove the fuses.

will a gloss enhancers shampoo effect beading/cleaning of nano sealants? like c2v3 G1 reload?