Search results

http://www.ebay.co.uk/itm/2-3-8-Stainless-Steel-Tube-Pipe-Exhaust-1m-Long-Repair-Straight-60mm-OD-/221206888638?pt=LH_DefaultDomain_3&hash=item3380f540be straight pipe cut to length then two 90 deg bends induction filter and 2 small breather filters to make your own kit up.

http://www.youtube.com/watch?v=2DPrEFWhqAc video of olivers mk1 with the 1.6 16v engine with an induction kit on.

how its still taking a reading of the same exhaust gas mixture?

you would need 60mm for the pipe. you could fit a panel filter junk the original caf and resonator box wouldnt give you much induction noise like the photo below. http://i1135.photobucket.com/albums/m621/Iwuqisubu/Car%20Stuff/IMG_1625.jpg or get a K&N induction kit get loads of induction noise...

wrong a HID can have the same pattern as a halogen bulb. it wont blind other road users as the kick up is on the nearside of the road same as a halogen bulb. if you have removed your headlamps then you need to get the aim rechecked. only HID conversions using the h4 bulbs will need converting...

you wont need to take your subs out the spare tyre is not part of the test. if the tyres touch the body of the car it is a fail.

you unbolt all the housing off the back of the engine. the sensor you see is the idle control valve that unscrews from the housing then you need to join it to your new pipe or put a small filter on it there is also a breather pipe that is behind the housing just below the throttle body that...

not without work. wont get any gain.

got the same engine but a 1.6 16v induction kits sound great on them.

you need to take the airbox off the back off the engine and also the resonator box off then fit a pipe from your throttle body to come round the side of the engine so you have room to fit the airfilter. give me a few days and i will post a pic up.

autodata say it holds 1ltr

http://www.jenvey.co.uk/home/throttle-body-kits/jenvey-dynamics/renault-clio-172-sf-taper-throttle-body-kit-ckrt03

servo or servo vacuum pipe leaking?

cr is 9,8

could you not use one from a throttle body kit from someone like jenvey?

thanks singlespeed going to get a 51mm system to keep it all the same bore.

flywheel bolts 55nm clutch cover to flywheel 20nm inlet manifold to head 21nm exhaust manifold to head 20nm downpipe to manifold 17nm water pump 17nm spark plugs 27nm oil filter 20nm lambda sensor 45 nm knock sensor 20nm front hubs 280nm rear hubs 175nm track rod end 37nm steering rack mounts...

http://www.contitech.de/pages/produkte/antriebsriemen/kfz-ersatz/docs/ti/10_Special_01_en.pdf guide to timing/ fitting the cambelt kit.

they are only fit the renaults. http://www.ebay.co.uk/itm/4PC-Renault-Engine-Camshaft-Belt-Timing-Setting-Tool-Kit-Set-16v-K4J-449840-/271146159045?pt=UK_Hand_Tools_Equipment&hash=item3f21920bc5

euro car parts. part numbers 657743201 £35.40 use spring20 and its £28.32 delivered.

if its the outer joint gone can get a joint and boot for £35 brand new.

sorry posted before reading that reply.

only needs a new boot £65 is about the going rate including the boot from an independent garage. can get a stretchy boot and cone for under £10 delivered easy to do your self take about 30mins to do

yes on a 1.4 or 1.6 16v.

you wont know if it needs skimming if you just look at it will need to get it checked chances are it will need doing if it over heated. the timing tool set you will need the 3. you need bar to set the cams,pin to lock the cams then a tool to lock the cams. sorry wont need to touch the aircon...

will also need inlet gasket,exhaust gasket,cam seals crank bolt if your kits dont include them, (aircon pump seals and gas removal recharge if fitted)

thats with renault prices dont forget things like oil,oil filter,pas fluid, anti freeze, sealants,head skim,pressure test, thermostat aux kit.

you would be looking about £550 in parts to repair yours. you could get a 2nd hand engine but you wont no what its like/history. if the 2nd hand engine dont come with prof the cambelt and aux has been done or is due would need changing that will need doing before fitting the engine. could fit a...

check the fluid level if its low can make it more noisy on full lock same if the aux isnt tensioned correctly. easy to replace the pump could pick up a 2nd hand bump for about £30.

rear wiper is not a testable item so will pass even if it dont work or missing the blade ect the tester can only advice it if he wants too.