Search results

UPDATE: A proper boys weekend as the wife was away. I had a load of things I wanted to get sorted on the car and an overhaul on a bike to complete - who'd of thought the bike would be the issue and the car would go swimmingly... It potentially should do though I guess with the amount of...

Ah it is good to here it is possible. It will only be the 1 connection too. I have been leant some proper ally spanners for the job so hopefully they will help, no spare hands though.... watch this space

Hhhmmmm the routing I am thinking will not allow me to pass the finished item through the car so I may have to do it in-situ. Also I do not have a vice, or the vice tool ?

Great. Just needed to check before setting up tomorrow. Think I may need a straight connector rather than 90deg but will try work out best routing. Do you think the vice tool is vital when tightening down?

Looking at how to run my fuel line and just need to check if this looks right as the bulkhead connection Can anyone confirm?

Just had a catch-up on your thread, fair play mate it has really come on, must feel great to finally get it out on track. Interested to see qhat you and @robzracing are thinking brake wise, I still need to sort my brakes...

I posted a link to it further up. I do have another spacer (like the one on the bottom bolt) but i didn’t want to add it and make the bracket more wonky... However it is spaced out on the top bolt with that washer, it may not look like it, but it isn’t touching.

UPDATE: Pretty miniature as I don't have any grommets to suss out hole sizes for fuel lines. However my new alternator mount did turn up today, so was fitted this evening. Has gone on a lot easier than the original item, the alternator is straight and the belt nice and taught, and more...

that looks bloody lovely

Thanks all for getting back to me, Thank you, much appreciated. This was my thoughts exactly, it is so tight there, especially to get a fitting only 20cm's from the fuel pump. You must have had some patience @Chambers_RS to get that in there.. ha. I am sure someone suggested to me (I...

@Tomotek @robzracing @pule333 @Chambers_RS I have just been looking at all your project threads to see how you have run your fuel lines, all are different, which may answer my question. I initially planned fitting a bulkhead connector in the rear footwell area but am thinking this may be too...

Thank you both, it is good to know he is not suffering anymore.

In my experience Mitch very rarely replies to text so I usually call him. I had my brake lines a long time ago (probably February/March and was not in a rush so didn't really experience any inconvenience. I know he posted something on instagram today of a load of envelopes so hopefully one set...

UPDATE: As I anticipated I didn't get as much done as I initially wanted, not necessarily for reasons I could foresee last week however. I spent a lot of time friday night final checking the routing of the brake lines before then deciding where all the P-clips were going, these were then marked...

I could, but that other mount is already gone.. the new item is on its way tomorrow.

Black to match the rocker cover and strut brace. Checked the length and it should be spot on - approx 170mm Nice and compact. Should solve all the issues and leave me with the original as a spare

I have a genuine lower bracket, its just massive and bulky so was just going nice and slender. Good a as a spare though, alternator adjuster bracket like the above now ordered

Not your fault at all mate. That would be the cheapest option but I am not 100% happy with washering the top mount, how the aternator is sotting so hi and the fact it feels slightly twisted. I am ordering that new mount which should solve all these issues.... #hopefully It is also lots smaller...

Been advised on one of these, https://www.ebay.co.uk/itm/Renault-Clio-16v-Williams-GpA-PAS-Delete-Alternator-Adjuster-Tensioner-Bracket/283129531179?hash=item41ebd5cb2b:g:jbAAAOSwa-dWpgHn Could solve my issue and also mean I don't need to run the washers on the top mount also.

UPDATE: So a tiny bit more done again tonight. The thought was hopefully to sort things with the engine and the lines the tail end of this week and Saturday and then get the engine back in Sunday, but some personal things are going on that have to take priority - probably for the better as I am...

More facebook heresay.... Having looked at the top mount tonight it does not sit flat with the block, it sits on 3 lugs therefore a plate across the back of it probably won’t be of any real benefit over washers.

If you are spacing the top/block mount out then surely that does the same? (in my head anyways) I wouldn't hold out hope of Rsport being able to provide any more items - apparently this was the last bottom mount they had when sold a fair while back. But as mentioned in the initial post...

Somebody on that thing ‘facebook?’ said the cup racers used different block mounts and different alternators

I think that may be a better idea rather than just using a couple of washers. Luckily my neighbour is an alloy machinist, it just may cost a fair bit. Yep cup alternator

That looks pretty different again, you have a torque bolt, almost looks like a cross between the original mount and the one I posted. I wonder if the block mount is different to the originals. Do you know what this was from?

I probably won't get anywhere near the performance of the car anyways... ha

UPDATE: With the the rear brake lines away and waiting for these to come back I turned my attention to the couple of small jobs I needed to do on the engine (as once the lines are done it will be ready to go back in the bay). The engine was serviced with a new cambelt a few months back, the...

Running a Jenvey fuel rail to go with the ITB's wasn't an issue previously (when the line was under the car) should this make a difference really?

I am running full phase 1 fuel set-up (tank, pump etc) which means only the one line. Engine wise it is ITB's and mild cam's Sounds like a good idea Mitch, any support to the customer I am sure would be welcome. As you say you are available on the phone (which has been great, always polite and...

Do you advise a regulator? Proper amateur question but what does it actually do?