Search results

eBay UK is your best bet

Cant be many about surely? :cool:

tip I was suggested is to use a longer nut and bolt then mole grip the clamps and swap the bolt back to the original if that makes sense

did Ronnee sell hers?

thanks bloke I will give it a go ☺

ok so it should get me through for now

I mean the piston or whatever its called as dirts still able to get in with the febi ones

will removing the bulb pass on its mot does anyone know? has been flagged up so has failed. had it plugged in but is reading rear pretentioners :s thinking of this just so I can take it for retest before the 10 days is up

I'm thinking the reader may be picking them up incorrectly as I have searched high and low for any sort of wiring. Will get it plugged into another reader I think.

anyone able to help me out as to where the plug on the cars loom could be or what colour the wires are? desperate to get this done today

I ordered a pair of febi bilstein ones but the boot is too short on it as it doesn't cover the shaft, so I would suggest using standard. I'm oncup shocks with eibach prolines

Anyone with a stripped out rear on a 172, failed on my airbag light which is bringing up rear pretentioner fault both sides. Have pulled the seatbelts out and there is no wiring on them and I cannot see any wiring on the car. If anyone can supply a pic for me that would be much appreciated. Need...

nice little guide, what are people paying for pedal covers btw?

someone is selling sets for around £150 on the clio16v facebook page

I have been searching on here for about an hour now but cant see exactly what I'm looking for. The connectors under my passenger seat have been chopped off and connected incorrectly to each other so I am trying to find out what colours connect to what as I would like to try fixing this without...

Is anyone able to give me a step by step guide to doing the cambelt/waterpump for a 1.2 8v non tubo twingo mk2 09 reg is there a Haynes manual available or may it be covered in a Clio Haynes manual as I assume its a variant of the Clio engine any help appreciated Rich

Some ford grey it was. Rattle cans from Halfords

these are r19 wheels rather than valver btw, I was also stumped with colors but here's mine atm

Iv not had any issue with the MTC kit in the year they have been fitted

thanks for all the replies :)

https://www.ebay.co.uk/itm/Handbrake-Cable-FKB3334-First-Line-Hand-Brake-Parking-6000073733-Quality-New/332309358029?epid=1842043962&hash=item4d5f2e65cd:g:pHwAAOSwmBhaBq1s...

Instead of me making another post, anyone know the length of both cables? found pattern parts matching the oe part numbers but want to double check the length 172 ph2 TIA

right, my concern is that its got wrong wishbone/ball joints which is why the camber may be out (too short perhapse) rather than there being so much play that its effecting the camber

This is the thing, the sideskirt is cracked on that side, so have a feeling it had a bit of a bump before I got it. Perhaps wrong parts were then fitted. Can't see any damage to the subframe etc

???

thanks for that. Really don't want to pay £140 just for a pair of wishbones. ☹

yeah there's a set of pattern part wishbones on eBay for £70 hence why I was thinking of getting them instead.

I'm not talking a small amount. It's degrees out and I have checked so many times now. It's 100% out just looking at the car you can see it

other option would be to just replace bushes/balljoints with rubber as its a fair bit cheaper than buying new. I have a spare set of used wishbones I could fit them to also