Search results

shout if you get stuck

yup can add a little more if you like as fibreglass can be a pain to dry off sometimes

yep, should have a spreader with it to mix it up sometimes comes with a brush too to brush your resin onto your sheets

you cut out the sheets to fit at the back of the splitter (but imo theyre s**t and youd be better screwing in a metal plate instead with countersunk screws) then you rough up the back of the splitter with P40/P80, the liquid should come with some hardener, usually yellow tube, then you mix that...

been sprayed before then and not a very good prep job by the sound of it. any decent bodyshop can sort laquer peel mate, its no major thing

why you need mini usb to jack? i can find normal usb to jack or mini usb to female jack, then i suppose you could run a double male jack from that into whatever you need it for cant find a mini usb to 2.5mm male though

looking at £250-£300 for full front end respray and stone chips sorted getting a new bonnet and bumper for stone chips is pretty laughable

if its completely snapped id probably reinforce the back too thinking about it screw a metal piece accross the back. countersink 2 small screws at the front then grind the heads off if needed, then fibreglass and fill

drop bumper off, or just splitter if it comes off seperate, then fibreglass it from the back grind the crack down at the front and put some in the front, grind that down, skim of filler, prime, paint

fibreglass kits are crap mate, very messy. just get a small tin of resin with the hardener if you need to fibreglass

id just try source a bumper the right colour, wouldnt be miles off, but its definatly the wrong colour

nah wrong colour

maybe ive never used srp myself so cant comment. if you really dont wanna add more lauqer id give them a slight wetflat with the finest wetordry paper you got thats lower than p1500 (p2000,p2500,p3000) and buff them up with g3 thatll give them a better shine

nah fair play for having a go yourself, but id definatly put some more laquer on them

not enough laquer on them dont look like theres enough paint either

no its bonded in

phone sky and ask?

subtle, without telling someone i doubt theyd know. looks good

beaten to it

might polish out mate without needing to paint it, will be barely visible try some G3 also have any of your workmates got light blue cars, or any vans that come in that are light blue?

pmd

yup

yup yup, always use etch primer on bare metal staff or else it will all come flaking off, especially on something like handlebars, they need to be durable. so plenty of laquer too anytime

knock off nigel is 100% laughable, to think someone got paid bloody good money to think up that advert. baffles me how anyone can think that is gonna prevent piracy is beyond me. they should have hard, no bs adverts stating the fines you will get (not max bs fines that noone ever gets), what...

are they bare metal? if so, rough them up with something like P320 and use etch primer, just a couple of dust coats to cover is fine. let that dry, give it a key with whatever you have handy, the p320 dry is fine or you could use wetordry P800,p1000 or p1200. then use normal primer over that...

different... aint too sure on the painting the roof black.. i think some decent quality carbon film would look better, but itd have to be a quality job. maybe get yourself a carbon fibre tailgate too

£600?!? get a ful respray for that looking at £300

maybe a please wouldnt go a miss

st sticker along the side looks bloody awful, cringleworthy. good luck with the sale though