Search results

, could get away with a k9k722, , would just need bare block and head , swap your ancillaries over to it, pump and injectors ect. All dependant what spec engine yours is ; a picture of the engine will help. Will know what fuel system it’s on ect

Careful, some later k9s front starters are cable shift boxes but 6 speed will not fit as Bolt holes don’t line up. kangoos are a right mash up of all versions from what I’ve worked on. as for heads; depending what type EGR unit is bolted to it ; they’re differ ever so slightly from euro 3/4...

Welcome to my world of putting an 11 back on the road ... still trying to get a windscreen for it... been told 9 and the 11 are practically the same up front. Comical to know that mk2 pov spec suspension parts fit aswell 😆 yeah was thinking of putting a blow through Webber onto it and then...

Water pump was the same on my 11 GTL when I changed it the other day. Had to ‘ modify ‘ de-cast the casing to clear stuff. Tempted to bolt a turbo to the 11 🤣

I was with you remember ... half the admin was in that coffee tent with them 🤣, howling at you just walking in like you own the joint pmsl!

Think they learned to not EVER pitch up next to a load of northern / welsh people ever again .... couldn’t stop crying at who ever it was throwing an tantrum!!! f**k sake it’s a camping weekend, we all don’t need a extension lead for but plugs

a lot of names in here I don’t recognise lol, I’ll most like be going again. Will know start of next year

Hi ?

Still need to take a go pro with me but forget every year... nobody expects a diesel to come flying past ????

Great weekend as per , nice to put names to faces ... including Romanian tyre fitters @YorkshireKyle Track time was behaved as usuall! Apologies for the hold up when I blew the EGT sensor out my manifold lol Aaaaaand lastly , the snoring was minimal this year , thank you !

Be reet ... besides what’s the worst that can happen ?

That’ll last an hour..... filters and me will have you passing in a ditch in no time ????

I’m all for changing circuits and that , but at blyton I can’t see that going down well. The people that enjoy taking it easy on track are just going to cause a traffic jam for the more experienced folks. The normal track layout might be a tad boring for some as after a few times you learn the...

Funny enough rover PG1 gearbox’s used to be able to use engine oil. Why I don’t know. It’ll be fine. Run that around for abit and dump / refill if you wish later on. Not going to kill the box

Crank pulley bolt not tight enough this letting the the bottom pulley slip ( if it’s not a keyed one ) is the only way i can see that happening other than incorrectly set tensioner. Either way atleast it’s sorted, 1tooth is cutting it close , 2 tooth out and it’ll do damage. fair play for...

Yeah even a faulty injector , if it was that fucked to make a hammering / tapping noise , it would be chucking white smoke out the back and be a fucker to get to start

He means have you turned the tensioner the right way to tension it , some tighten the belt anti-clockwise or clockwise depending on kit installed

It still runs , not scrap yet mate. Check the timing ; I’m betting on its jumped or by chance the cam pulley key has snapped off and advanced the cam. I’ve done plenty that come in sounding like that. If it was bottom end , it’d be knocking like hell

We ain’t all ballers mate ?

You best turn up this year youth !

Remap at somewhere reputable and it’ll be a nippy car and not s**t the fuel pump 5mins later down the road. DERVTec Manchester , RS tuning in Leeds. Or anywhere else once you’ve done your research into a decent company. Anything over 125/130Hp is bullshit figures. Martins been there and...

Nice to see it’s finally all coming to an end ! I’m sure micks probably bold headed now lol ( a joke , please no offence ). How handy is mick with cameras , get a few pics thrown up mate. Hope to see at Csf19 , think the last time I seen it one peice was billington aqadrome. My mk1...

1.9DTi is the old F8T unit , that's a straight fit wiTh a jc5 box, BUT is old school electronic controlled VE pump. 1.9 Dci F9Q/ F9K 6 speed version is the one to go for. 5 speed block won't take a NDO 6 speed. Makes a massive difference having the 1.9 and a cruise gear.

It'll work if both mating faces are bang on machined.

Should look like this with the guard off , loom on show on the rail

The big block part at the front of the engine comes off to gain access to the fuel rail and injectors , held on wiTh 2 13mm nuts inside the holes on the from , if I remember rightly

Unbolt fuel rail guard and you can get to the loom easy enough

Where did you get the inner rear tub / arch panels mate ? Need to sort my drivers one out but I'm loosing patience with trying to ' roll ' a new tub section

The block and caps can me machined to put tagged bearings in. I've had it done to one F4R. Altho there's no real benefits as I've hardly seen the spin bearings

Fuel pump s**t itself, injectors failed or fuel system supply related by the sounds of it. Needs going on a proper diagnostic machine and looking at live data for fuel pressure on cranking , actuall and requested from ecu ( pressure regulator ) Other thing to check is carefully take your...