Search results

compression test it, probably burnt out valve

mine works fine with rs tuner mate,, and its still got the 1.2 airbag module (the lights on the dash and they are inop) so i doubt thats your problem. whats it coming up with on rs tuner? mine worked seamlessly and as far as i know the cars setup exactly the same as yours,,, you sure you...

mcguard are THE easyest locking nuts to get off.. speaking from experiance as i do a fair few, elites in rainham (quite a large alloy wheel supplier) for those that know the area, send the jobs to us.. mcgaurd are too easy, peugeot next, can both be gotten off without special tools and...

ecu definately knackered? injection loom can be repaired,, its only wires and plugs, only time it will want replacing is fire damage.. i've done countless 1.2's with the chafing loom problem, solder/heatshrink the loom and the ecu's have been fine

burn it? nothing left to check is there? i've seen a valve seat come loose in the past, but you would notice a loss of compression i;d imagine

you sorted the knackered thread on the head bolt i take it?

244-246 London Rd Romford, RM7 9EL 01708 764401 tell them church elm motors dagenham sent you,,, they may or may not give you a bit of a discount, we tend to put a lot of buisness there way

if you arent sorted mate, i'll get it for you tommorow

where in essex are you? m+m transmissions london road romford,, reccomended

did you ever sus that noise fred? never saw the outcome in that thread

foxy.. balljoints, phone euros again and ask for the same thing,, chances are a different monkey on the other end of the phone will find them if not, i dont know if you have branches at your end,, but i know for a fact motor parts direct sell them. as for brake lines, make them from copper...

plastic gaiters are rubbish cable ties WILL NOT hold it,, i tend to just cut them off and fit rubber ones you can jubilee clip them.. but for what it takes i think its a better job to properly fill it with grease, whack a rubber boot on it, cable tie at each end and it will never come off

trw is the manufacturer

no. door ---> hi miss blondie :evil:

i see what you are saying mate, i still think its going to be a handfull. i've heard it things like lighter the car the better just look at f1 cars etc.. but you got to remember a formula 1 car has about 2 clios worth of downforce acting on it

sod even trying lol i tryed fiddling it out and keeping the blood pressure in mind thought it was best to loosen it,, i only moved it back a bit but by the time my finger was p1ssing blood all over the place i got the apprentice on the case :rasp:

must have just got a good one :eek: engine swap mate :)

god knows what im doing wrong mate! when i use it it looks as though a football team got a bit happy over my car

there ya go,,, drive it down to essex i'll even fit them for you now theres a tempting offer lol

yep,,,, will be fine may not quite fill the arches but other than that cooshty

you never heard of them? same sort of idea but lumps in different places etc

yeah, looked cheap considering they had two decent yoko's on thought sod it. i was wondering about black just worried the center caps would look cack painted black.. might bolt them on and see if the offset brings the wheels out a bit further then decide from there. yours been ok mate?

i'd imagine they come in all different offsets you need to ask the seller punto offsets are 33-38 so you should be ok, will be somewhere near standard stance the 4x108 is a bit of a problem though, you will need corrective (wobble) bolts if thats the only stud pattern on them unless they...

check theres not an engine bolted to the back of the airfilter. common problem causing this noise

you are quite arty on the sly,,,, lol very nice best cup on here by a mile you need yellow samco's like i've just put on b16doe's

really wanted comp mo's in 15" but bit much money at the moment by the time i added cost of tyres... we'll see, cheers for comments

mega jealous,,, all cars should be like this by law im interested as to what the handlings going to be like, i can see it being a bit of a handfull having no weight in it,, seeing as downforce isn't going to be a strong point that said all the weight that is there is very low down in the car...

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220285111837&ssPageName=ADME:X:RTQ:GB:1123 i have loved these wheels since year dot,, bit of a gamble for the clio i think but the tyres look good on them so worth a try. any thoughts? never seen it done

knock up an apaptor plate/bell housing or something like that,, you'll be on to a winner mate!

i dont think it will,, the spokes are too big on the 172 wheels to pull off white imo looks fantastic on wheels like howsers though