Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
My 172 airbag light is on and when I used a code reader it said "rear airbag pretentioners" stripped the rear to check and there's no wiring there whatsoever. So I checked on eBay and some rear seatbelts have the wiring for it so I'm not sure what cars do and don't have the wiring tbh. Standard...
As titled, I fancy a change from my ktec stealth system. Has anyone got any opinions in these systems? Very cheap but I'd like to know what they sound like. I do trackdays so it can't be too loud. Also I can't find the bore of the system if anyone knows it?
Any help appreciated
What do I need altogether to get this to work. I have a ktec catback at the moment and have a 182 manifold to fit. Can I use a 182 cat or do I need to use a link pipe? I'd like to be able to switch out cat/decat and using a standard 182 cat would be easiest option. Also what happens with...
Any reason I shouldn't run a 5pk instead of a 6pk. Have a misalignment issue due to a Pas pump pulley sitting too close the the engine and a 5pk should sort the issue out without me having to replace the Pas pump again
Turns out the cause of my belt jumping is the gap between the pulley mounting and the pump itself. I purchased a recon pump from ACS off eBay but the shaft has been pressed further in than the original so is roughly 1 rib closer to the engine hence causing my belt to jump. With checking if you...
No idea if this has been causing my issue but seems likely it was something to do with the tensioner. No idea what its been rubbing on as I cant see anything in the way. 20k/3 year old tensioner. But has had a couple of replaced belts as have had to replace Pas pump and a/c pump in the past
Demon tweeks currently have a good deal on these. Only the black are in the offer and come with fitting kit
Size is 15"/ET35 for that price
Thought this might be helpful to others :)
Basically my aux belt has jumped a grove on the crank pulley. Moved over one to the cambelt side. Any idea what would likely cause this. Has happened twice now (on diff aux belts) but same tensioner
Any ideas welcome
Not been serviced for ages. It's 135k currently ? well it had a random filter that I had laying about on it before so switched it to a ramair which I think feels better when driving atleast. Seems to show an improvement
Other than that I don't think anything has been changed since the...