ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. vroomtshh

    Monaco budget track build.

    You've ruined this. Was awesome when I owned it. AC even worked then :p
  2. vroomtshh

    New Sump Bolts

    Stick with 25mm
  3. vroomtshh

    Single wiper conversion

    Only had power and earth. So was either on or off
  4. vroomtshh

    Single wiper conversion

    I did it using a mk3 megane rear wiper motor
  5. vroomtshh

    Ph1 'Exclusive' Budget Track Car

    What Clio?
  6. vroomtshh

    Ph1 'Exclusive' Budget Track Car

    So I eventually sold it :(, but it went to a good home. And in the spirit of budget build threads, I've replaced it with this Keep your eyes peeled for an update or two ;)
  7. vroomtshh

    The everlasting ph1 ITB Build **GREEN-BUILD STARTS AT PAGE 100**

    Sorry, I mean the input channels in the software, not the physical inputs. Input 1 (physical) is input 13 in the software from memory
  8. vroomtshh

    172 CUP Track Car

    If it can wait til Monday, I can tell you which wires you need to use ☺️
  9. vroomtshh

    172 CUP Track Car

    My TPS has 3 wires coming off it that connect to the existing loom. I just used a superseal connector so it can be plugged in or unplugged to remove from the car. OE air temp sensor works fine
  10. vroomtshh

    The everlasting ph1 ITB Build **GREEN-BUILD STARTS AT PAGE 100**

    A couple of things to consider How many things have you run off the 5v reference feed? Once you take the resistors into account, it can't always run everything. Are you checking the correct analog inputs. IIRC, input 1 is actually input 13 on the dash software. The first load of inputs are for...
  11. vroomtshh

    Turbo on its last legs? (VAG TFSI K03 question)

    VCDS boost readings are total, so its 33psi less 14.7 (atmos pressure)
  12. vroomtshh

    Ph1 'Exclusive' Budget Track Car

    You've had a busy couple of days reading through it 😂 Fingers crossed it doesn;t, but I'm sure it'll work itself out one way or another
  13. vroomtshh

    Ph1 'Exclusive' Budget Track Car

    I haven't actually made any decisions to get rid, but I'm about to lose my current storage for it, don't have time to build a garage at my place currently and have even less time for working on it or using it 🙈
  14. vroomtshh

    Ph1 'Exclusive' Budget Track Car

    I guess you missed most of the thread and the £20k plus of parts that are in it?
  15. vroomtshh

    The everlasting ph1 ITB Build **GREEN-BUILD STARTS AT PAGE 100**

    It most likely will, but you'll have to set up the sensors to work
  16. vroomtshh

    The everlasting ph1 ITB Build **GREEN-BUILD STARTS AT PAGE 100**

    Do the sensors have 5a to them with a pull up resistor? Are you using the dash 2 5a supply? And are you using it gir the fuel display too? Depending which resistors you've used, it can be too much for the supply voltage
  17. vroomtshh

    How do you go about pricing a track car?

    I'd advertise that at £2500
  18. vroomtshh

    Ph1 'Exclusive' Budget Track Car

    You never know :sneaky:
  19. vroomtshh

    Green Track Cup - Back To Basics

    Nah was all good. It was the vibrations through my leg that was the killer ? Worth it though, now looking for a sequential ?
  20. vroomtshh

    Green Track Cup - Back To Basics

    After a passenger ride, I can confirm all of the above ☺️
  21. vroomtshh

    The everlasting ph1 ITB Build **GREEN-BUILD STARTS AT PAGE 100**

    I'm currently building a new loom. So go for it, it's all fresh in my head and I should have pictures ?
  22. vroomtshh

    The everlasting ph1 ITB Build **GREEN-BUILD STARTS AT PAGE 100**

    Yep, I have a data logger (gives you more channels) but it's in my garage unfitted yet
  23. vroomtshh

    The everlasting ph1 ITB Build **GREEN-BUILD STARTS AT PAGE 100**

    For speed - I have the original dash 2. Race technology sell a wheel speed sensor. I put it in the original ABS sensor hole on the passenger hub and ground all but two teeth off an and ring and welded up the gap between the two teeth. That way you have a dedicated speed sensor and I think it was...
  24. vroomtshh

    172 CUP Track Car

    Because everyone hates clios at some point
  25. vroomtshh

    172 CUP Track Car

    I did that, then changed it to a threaded sensor so it was neater. That's what I would do if it were me
  26. vroomtshh

    172 CUP Track Car

    Remove the map sensor plug. You'll need an air temp sensor though
  27. vroomtshh

    172 CUP Track Car

    I don't think my 140bhp diesel auto would be much fun on track ?
  28. vroomtshh

    172 CUP Track Car

    All the cool kids have Leons as a daily and clio track cars :ROFLMAO:
Top