Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hi all
Looking at some engine prevention work, and looking into doing the valves & springs.
Can you recommend what to go for and who to do the work?
I'd probably look into doing the rod bolts as a precaution aswell I.e. ARP bolts.
Cheers
Josh
Morning all
On my precious 182, I had the PMS lightweight pulley kit and looking at getting these again on my 172.
However, after reading that the crank pulley should remained the damped style due to the potential issues the lightweight pulley can cause with damaging the crank.
I want to keep...
Hi all
I changed the spark plugs on my clio 172 today, and whilst there checked the oil level.
What I did notice was that there was a smell of petrol.
Could this have been caused by the alternator issue whereby they wasn't enough power for the spark plugs to ignite the fuel? Or should I be...
Morning all
Been away for a while, I had a Ibiza Cupra 1.8T then swapped it for a Astra H VXR running 427bhp.
Had a half cage and standalone ecu with Garrett Turbo.
Decided I wanted to time attack with it, and went balls deep into the build however went too far and costing too much. So I sold...
Hi all
My dad has picked up a Clio 182 turbo. It has got Gaz coilovers, and he has a graph in his paperwork for the coilovers. Is it do with the testing under full compression/ decompression?
Hi all
At the end Of this month, I will be in the position to buy some new suspension for my 182 track car.
I am looking at the AST 5100 coilovers or the Pure Motorsport Bilstein B14 kit http://www.pure-motorsport.co.uk/pure-motorsport-bilstein-full-coilover-kit-clio-2rs.html
The AST have a...
Hi all
Looking at getting a pair of wheel bearings for the new hubs I have bought which the @NorthloopCup roll centre correction kit.
They are trophy hubs and with a search the part no. is
77 01 206 771
Can anybody confirm this is correct as the cup/ trophy bearings are bigger than non-cup...
Hi all
My gearbox is weeping slightly from the shifter selector which I believe is common issue.
Where do you get the new seal from and expected time/ cost to do this?
Cheers
Hi all
I currently have the Spax coilover kit designed for the 750mc 182 cup series on my track only 182
http://www.k-tecracing.com/show_product.asp?id=4776&appid=2
I am however looking at the AST 5100 series coilovers.
Is it worth changing or just keep what I have got?
Cheers
Josh
Hi all
Looking at routing some ducting from the passenger side fog light to the air box inlet pipes. What size ducting would I need to go from the fog light? I have seen 100mm used from the fog light? I have removed the acoustic valve and have headlight blanks fitted with air intake holes on the...
Hi all
I currently have the ktec uprated mounts fitted (black ones) but I'm looking at getting the race mounts (red ones).
Had anyone got the race mount fitted?
From the website: "By popular demand we have now released a competition specification set of engine mounts for the Clio 2 RS range...
Hi all
Just wondering if anybody has got these fitted to there Clio's http://www.pure-motorsport.co.uk/details.php?itemid=330&model=6
It's the PMS Billet Stub Axle.
Many thanks
Hi all
So I'm looking at sorting the rear toe & camber settings on my 182 track car.
I have got a 10min shim to fit to the rear left side and and 20min shim to fit to the rear right side to get 10min toe-in left side & 6min toe-in right side.
However, if you also look at then camber it is nearly...
Hi all
My Clio 182 is purely for track, and currently it's set to 1.5degree camber one side and 2.5degree camber other side with 10'mins toe I think (set-up purely for Snetterton as more aggressive cornering one side compared to other) but looking at making it more suitable for other tracks...
Hi all
This is my Clio 182 track car (non-road legal).
Spec is as follows:
- Carbon Lorraine RC8 front pads
- Carbon Lorraine RC6 read pass
- Braided brake lines
- Dot 5 fluid
- Standard discs
- Stud conversion kit
- 8 team dynamics wheels (1st set with Dunlop direzzas & 2nd with Michelin PS3)...
Hi All
I am currently having a 182 built to Clio the k-tec 182 championship spec.However, this is just a base before I add more parts.
I am looking at getting a set of ARB's from either k-tec or pure Motorsport (pure come in two thickness or 19mm or 22mm) so wondering which to go for? And also...