Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
hi. just doing my AUX belt again after the adjustment bolt has snapped and am trying to assess the various pulleys
none are noisy to spin, but there's a little end float on the PAS pump and a little lateral play in the waterpump - should these both be solid, or does that sound OK as these go...
hi; just a quick wonder about suspected belt/bearing noise.
the car's been screaching on start-up for a couple of days; it doesn't whilst being driven, but does seem to be emitting this odd whistling/rustling noise (sorry, impossible to describe these things, i know) - does this sound familiar...
Espace box (part number 7700 260 096); i've read that this comes with a filter element but just after conf
seems untypically generous
ta, if anyone can:)
bit schoolboy but, whilst it's fresh in mind, thought this might be useful to others
what to try if your front brakes appear to be pulling to either side, or you're experiencing uneven pad wear
other than basic tools, need:
copper grease
moly grease
thread lock
wire/suede brush
file...
just looking a list of passwords i've accumulated, and there's one for a site called VISAonline. thought i'd have a look at it, then noticed that my PC security wasn't sure about the site (without knowing much about it, going to suggest that people DON'T! go looking for, or on it)
it's...
firstly, i know there are countless threads about tyres on here, so apols in advance
i'm running Contisport Contacts, but am fed up with the wear rate and fancy a change. think i'm looking at three different tyres, all recommended by different sources:
Hankook V12 - but can't seem to find...
got the 72k service to do and have ordered an AUX belt. just reading the workshop manual, it states that the tension should be checked with tool 'Mot. 1505'
just wondering if this is DIY-able. i don't want to chance it and would rather pay to have it done professionally if there's any doubt
hi. can't be doing with ringing anyone about this just now, so thought i'd ask on here
according to some of the official xbox stuff i've read, i can just use my computer's USB modem, but the xbox doesn't seem to be recognising the hardware. the lights are OK on the modem, but no interaction...
i've noticed that the severity of the crunch when shifting into 3rd from peak rpms in 2nd has recently worsened in my gearbox
having had a little play, i've also noticed that i can drive around it by short-shifting (at, say, 50-55, instead of 60)
my question is, will the crunching make its...
looking at this, with a view to welding it
can anyone confirm that the whole assembly needs to come out (looks as though it does?) and, if so, if i disconnect battery and ECU, will it all go back together without creating faults/illuminating dash warning lamps, etc?
i guess a few people might be considering this, given that KTEC's grips are becoming available now - just thought i'd share an experience, to save others the bother of my schoolboy error
some may already be aware of what's affecting the leather on the rim of the wheel (?)
.
i thought i'd...
hi
looking at renewing the fronts again; using the original spec ContiSport1s and they're seemingly not managing much more than 10k, which is becoming a bit of a pain
guessing it's partly to do with the car's geometry, and partly Conti's softness. susp is std, it's all on road, and isn't...
just a quickie - does anyone know what's earthed by the strap/lead behind the carpet, underneath the nearside rear lamp cluster?
i could fiddle to find out - just wondering if anyone knows
thanks
struggling a little and wondered if anyone could provide a definitive answer to a couple of Qs
i've got an Alpine CDE101RM and have tried the Auotleads (PC99X12/ALP); the remote controls will work, but there's seemingly no permanent live connection, so i'm losing everything as the ign's...
just wondering what you guys have done as and when the rear springs snap - i particularly don't want to replace with a set of lowered/stiffened springs, although Renault have quoted me £90+VAT (!!) per spring. s/h is an option, but does anyone know what's available otherwise?
thanks
just a quickie - can anyone confirm how much front dampers are for the 172 Cup please? had a quick look on search and couldn't find a confident answer
thanks
Just got a quick question - can anyone explain the differences between the mounts on the RS Clio2, please?
Am I right to believe that they're all the same across the Ph2 models?
- Upper engine mount
- Upper gearbox mount
- Dogbone
- Support piece at front of g/box
I know the Ph1's dogbone...
bought some of this from my local dealer earlier (75/80; GL5), but have noticed that some on here say it should be TRJ, and others TRX - am i alright with TRT and does anyone know what the differences between the designations mean?
thanks!
trying to identify the source of a constant and slight shake/vibration from the car since having run over a rock and am wondering if anyone knows if these are worth thinking about further:
NSF camber -0deg38'; OSF camber -1deg13' (specs suggest -0deg49' minimum, although i can't see any...
i've tried a quick search but haven't been able to find a definitive answer to a couple of quick questions -
does anyone know if ECP/GSF supply driveshafts for the 172 Cup? has anyone had one, and what 'make' was it? (do GKN supply them?)
are the 172 Cup shafts the same as others? (picked...
i ran over a rock (cunningly disguised as slush, the f*cker) earlier on and now have a number of problems; just looking for a little advice.
having had a good look at the suspension, i think all's well (apart from a buckled Turini; got a spare though) and it seems to drive OK so i'm hoping...
currently looking at Kangoo diesel engine mounts and am wondering if anyone can confirm that i've the right part number/s
i've only called Renault so haven't had the opportunity to look at the illustrations
- the parts are for a 1.9 DCi (2003 - took a random registration from Autotrader..) -...
apologies if this has been asked before.
i'm considering AWT inlets and a de-cat, don't want to remap at the moment, and am wondering if they'll lean the mixture dangerously.
are there cars running with these two mods that haven't been remapped?
thought this might be of interest to those who don't need all of the components that are supplied in the kit
BOSAL can supply quite a few of the components individually, so you can save some money if you only need certain bits. i've not tried to find out about all of the bits, but here are a...
i'm looking for a cheap source for a couple of Contisportcontacts - can anyone advise? not keen on paying best part of £100ea and, with Contis on the back and 539s on the front, i'd like to restore the balance in the chassis (currently understeers rather impressively on track).
also, i've been...
fitted a new sealing ring/kit to the manifold/CAT joint on my car yesterday and it's still blowing.
the CAT's original; i noticed that the sealing faces at either end are quite badly pitted and am wondering if they're not sealing for that reason.
does this seem a resonable assumption and...
hi,
i'm trying to source an aftermarket fitting kit (as title) and am wondering if anyone has found one - ?
tried GSF, ECP, CES, and a BOSAL dealer - all no good.
Renault want £40..
ta
Had this car a year now and, as some may have sensed, I’ve not been overly-happy with it. It came with a bunch of mechanical problems, not least of all being a gearbox problem that unexpectedly led to its expensive failure (on X-Mas eve!:dead: ).
It’s taken me some time to get the money...
likely clutching at straws but i'm in desperate need of the rubber shroud that sits on top of the steering rack and protects the lower column U/J
expect it'll be another Renault parts dept job for Monday but i'm keen to get my car back together this weekend if at all possible and thought i'd...