Search results

Calling anyone that has had a fuel related issue for their DCI HELP ME PLEASE I have a fault with my MK2 Phase 2 DCI 100. Car just ticked over to 97000 miles BTW A few months ago I noticed when in 5th around 3500 rpm if I put my foot the floor the glow plug light, engine management light...

Following on from my previous thread..... http://www.cliosport.net/forum/showthread.php?715319-DCI-100-Glow-Plug-Light-Engine-Management-and-Stop-Light I have replaced the fuel filter as I dont think that has been done. Emptied the contents of the fuel filter into a bag and put a magnet...

Will it fit? I have most, of the parts here apart from a couple of bits. I'm looking to fit the sport bumpers, skirts and wings at a later date so know it will fit then but I thought I would do the mechanical stuff first as my mot is looming and one of the driveshafts needs a cv gaitor also...

Hi all, I have a fault with my DCI 100. I have only noticed it when in 5th gear and full throttle. The car gets to around 3500 rpm and then the glow plug light, engine management light and stop light will flash a couple of times for about 1-2 seconds at a time and then go off. I haven't...

Do I need to worry or am I being too fussy and wanton it perfect? Also what would be the perfect AFR about 13.6? Just a quick one this is my graph from Surrey rolling road 31st August. Are my afr's anything to worry about its a bit lean but I'm wondering whether I should be addressing this or...

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=141041362998

Link to Surrey Rolling Road thread Put your name down! http://www.cliosport.net/forum/showthread.php?708394-Surrey-Rolling-Road-31st-August&p=9754672#post9754672

KUX Part 2 I was ummming and ahhhing about creating a project thread as the level of detail that went in to Andy’s one is phenomenal! But in all honesty the only reason I am doing this is so that I keep track of when I done things and mileages etc etc. If you want to have a read of Andy’s...

Hi all I recently bought a mk1 itb'd clio running Canems standalone management. (All work done by Danny @ 519). I want to run the cable into the glovebox but I don't want to leave a wire in there what I want is a female usb connection on each end and a plate of some description so I can run the...

Please help im at my wits end! Can anyone please advise on the following. About 6 weeks ago I replaced my rear discs on my clio 1.5 dci 100 with Mintex (MDC1997) off ebay £40 inc bearing and abs rings! I replaced them as I had a noisy wheel bearing that hummed, although it did not have any...

​Few Bits I Have On EBay http://www.ebay.co.uk/sch/saunders6969/m.html?item=140974805287&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item20d2c0d127&rt=nc&_trksid=p2047675.l2562

Guys where is the transponder located in a 2003 clio 1.5 DCI? I need it so i can sell it with my ecus and injectors i would assume? Also the key reader thing on the ignition barrel is that specific to the car and keys etc Please help im scrapping the car tonight so need to remove the...

Are the mk2 ph1 and ph2 fuel tanks the same across all diesel and petrol models. the reason I ask is because I have now decided to break my clio dci 65 for spares and I am wondering if I can take the tank off of that (obviously flush it out) and then fit it to my track car so I don't have to...

Has anyone installed a heated front screen into there clio? I am thinking of putting on into my track car to help with defrosting etc? obviously heated front screens don't come as standard so does anyone know how to install the wiring and relays for it etc. thanks dan

Are they the same? I am having horrendous trouble with my track car. The car is not fuelling properly and splutters when exiting roundabout corners etc. the afr gauge leans right out and sometimes if i go on and off the throttle its ok other times i have to flick the ignition off and on again...

Just a quick one will a mk1 pedal box fit a mk2 shell. Also the mk2 accelerator pedal is that the same as a mk1 accelerator pedal? Thanks dan

What is this? It's off a mk1 phase 1. It's bolted to the offside rear quarter panel near the rear door card and rear wiper wiring Thanks dan

Hi does anyone have the auto data for the following please? MK1 PH1 F7R Fuel Pump Wiring Rear Lights Brake Light Switch Front Wiper Mechanism MK PH1 172 Fuel Pump Wiring Rear Lights Brake Light Switch Front Wiper Mechanism Before anyone says anything I have searched the forum but have not...

I have had a change of heart with running rubber fuel lines through the car. I dont think it will be safe enough so i am looking at running some braided fuel lines through the car. People that have done this before can i have your expertise please? I have ssen on ebay there are a lot to offer...

Hi all need some help please The CUP Master Cylinder what port goes to which brake. Help would be greatly appreciated! Thanks in advance.

Well i have been a busy bee recently. For those of you that dont read my project thread i have had a little bit of fun fabricating a F4R manifold (from a clio 172) to fit my F7R. I believe that I am the first person to do it. I know a couple of people had started to do it but didn’t follow it...

As above need to get a bolt to bung one of my lambda sensor plugs. Any help appreciated

Hi I am trying to fabricvate the 197 cage into a poverty spec shell. I am getting near the end of it but i am unsure how i am going to mount the rear stays to the suspension pick up points at the rear of the car. Are they welded into your car or do you put the suspension through the cage and...

As above on my 2004 1.5 dci 100. Last night coming home my automatic lights came on but my instrument lights did not illuminate. Tried again today and turned my lights on manually and still nothing. Any suggestions? Thanks dan

What are peoples views on running rubber fuel lines through the car. My mate thinks I should do it to make it nice and easy for replacing things etc etc. I can understand if the fuel lines are braided as there is a bit more protection but would rubber ones be ok. Would track day event...

Hi all, I am looking at getting a Clio 1.5 DCI 100. Just after peoples thoughts views on the car that have driven or own one. Also is there anything i need to look out for, common faults etc as i am going to view one this Saturday. Thanks Dan

Link below http://www.ebay.co.uk/sch/saunders6969/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686

As above how different are they? basically wondering if a clio 197 cage can be made to fit into a clio 172? Thanks Dan

Hi all, I have searched high and low to see what the ph 1 172 cup racer geometry was. (not to sure if they did the ph1 i know they did the ph2). Im after front and rear camber toe and castor if possible as i am going to use these figures as the basis of my track car. I know these are...

Afternoon All, Just wondering if anyone has the torque wrench settings for assembly all fo the suspension components back together and then fixing them back on to the car. Im talking about things like. Brake caliper to carrier Caliper to hub Ball Joint to wishbone Wishbone to Subframe ARB...