Search results

Im building my own 172 turbo using a gt28rs and im coming near to the end of it all now, to prime my turbo am I right in the following; squirt a little bit of oil into the oil feed and spin turbine by hand and connect oil feed up disconnect coil pack fuel pump relays removed return pipe...

Can i get away with using stronger competition engine mounts to stop the engine from kicking back as much whe coming on/off throttle to stop turbo studs snapping? My other option would be to find a suitable 6'' flexi thats fully stainless so i dont have to braize my decat to weld in a non...

Im running a 13 row oil cooler with a thermo sandwich plate and have been for a while now, but with the cold weather were going to get its best i nock up some sort of cover for it as the sandwhich plate still flows some oil through to the cooler even if its not upto operating temperature. My...

I have a sabelt steering wheel fitted so I have no way of manually beeping the horn by accident. However over the last few days it seems to randomly sometimes beep when turning sharply around a corner? (quite embarrassing as other drivers thing im smashing my horn at them going around coming out...

Just fitting a new clutch to my car and I dont have a small torque wrench handy, what torque settings do I need to tighten the clutch pressure plate to the flywheel in nm? Ive niped them up but not over tightend them too much, is it essential i get them perfectly torqued up to aid in precise...

http://www.ebay.co.uk/itm/1998-PEUGEOT-106-RALLYE-WHITE-/320748450099?pt=Automobiles_UK&hash=item4aae18f133#ht_720wt_1139 Do these usually start really low?

I could not find the other thread on turbo conversions and no one has mentioned this setup before. So as it goes Im intrested in the Engine Dynamics kit, especially in this deal http://www.engine-dynamics.com/epage...urbo Assembly" seems verry, even too cheap for everything you get with a...

I was behind you in my 172 cup, trying to wave hi then you booted it off somewhere.

Well seen as though there isnt a thread on this yet, its starting to look abit unsure on numbers. So lets start a list of who's baught tickets and going to the event. Also id like to see whos intrested or allready has plans to camp over the road at Henwood camp grounds. last eyar it was £10...

Are these the correct ones, there only £12.49 each hopefully will do the job just as well as other bearing manufacturers? OD-37MM ID-72MM WIDTH- 37MM http://cgi.ebay.co.uk/Renault-Clio-172-182-MK2-2L-Front-Wheel-Bearing-1084-/160541177813?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2560fff7d5

Sat behind you in a blue vxr if your on the forum. nice car, not stalking ha ha

Lastnight whilst driving decided to give it abit of foot down action but nothing to strenuous or taking it anywhere near the limiter i heard a 'snap' noise, so pulled over and took a look under the bonnet and couldnt see anything wrong, both belts are still there. Continued to drive it home...

Hi, need help and somone to shed some light on this. Lastnight my injector fault warning light came on for the first time, not knowing what the light ment I pulled into a lay-by and had a fiddle around. After about 10 minutes started the engine back up and the light went out and the car seemed...

so lastnights problem my injector fault warning light came on so I pulled over and shut the engine off and after some fidgeting in the dark decided to tur the engine over and the light went out so drove it home gingerly. So could anyone help me out who has a code reader as I need to find out...

Ive recently baught an oil cooler from Foxy (cheers), comes with braided hoses, themostat sandwich plate, and 13 row oil cooler. i can see how i all goes together but my problem is im having trouble trying to think how im going to fit it to cross member? Theres the square SEALED flat beam...

just need to confirm this is the correct one for my car to turn of airbag light and fit my new after market steering wheel. second one out the two of them. http://www.ybracing.co.uk/ompsearch.php?make=Renault&series=Clio 2a serie&version=2.0 16V RS&chosenyears=Jan-1998 this one...

RB 182 clio at the metro centre parked next to me in the multi story carpark when i left the metro at 8pm. not sure if its of the forum but looked well nice, YP54 YP55?

i know this might seem abit silly but do i actually need them for my fkl konigsports? the top elongated hole i just have been running my standard bolts through and nipped them up pretty tight to stop camber movent on top hole. anyway I was just having a think yesterday and want to know if...

At the moment theres been some talk of a harness bar being made for the clio. My problem is ive just orderd a new set of 4 point harnesses with the clip type anchors that fix to eye bolts, which i have fixed to the oem seatbelt points. Now im in two minds wether or not to return the clip style...

Right so ive now fitted my race battery last night and relocaetd my airbox straight of the TB. Now im having problems with the airbox fouling the top return pipe on my header tank. Ive tried twisting it out the way but no joy at all, i dont want to have to buy a new or smaller alloy header...

went for my second job interview at cummins and spotted 4 cliosports there, arctc blue 182, 172 cup, silver 172 with cs sticker drove past me going out the exit and another which i cant remember... anyone on here?

ive tried searching on the internet for garages in hartlepool that sell them as i need them ASAP, before sat and need them fitted! camskill can only deliver on monday, just need a garage i can go to and buy some! sorry if this seems abit panic'y but its urgent!

hi. so i baught some fk jonigsport coilovers abiout a month or so ago and fitted them all correctly. but now they have bedded in i can finally sort the ride height out and put the car on its dish! so lowerd the front no problem had the verniers on them and lighned them all up, all well, jobs a...

ive never did this before and despite all the searches ther was a vague sdescription how to do it and i followed it so far so good then removed the other pipe and slurrp!!:S right so ive taken of the bottom rad hose and watched it all gush out and removed the top rad hose (red) and flushed it...

seen you a few times over the last week, last 3 letters of reg plate are cup aswell as my gf spotted:rasp:

need a full service as its due and also im only getting 30mpg, somtimes as low as 26 on town driving!!. even sat just idleling i watch the trip computer mpg go down when im ideling not going up?:S very confused to why my mpg is 30 around town and only goes lower to as low as 26 when ideling...

just came back to my car and found that the power steering fluid has pissed out allover under the front passenger side wheel, had a further inspection and the hose has snapped!:( ive got a written off clio dynamique 1.2 16v 03 plate, just looking in the engine bay and powersteering setup looks...

Hi, im thinkiong about buying a silver 182 and having it fully resprayed LY for under £1000, but obviously id need the cup spolier and splitter and the wheels done in acerite? as buying a LY 182 would cost a fortune and also buying parts for a cup packd ly 182 would cost a dfortune as we all...

can somone tell me which sytem this is on yozza sport website please, sorry to hassle :)?? http://www.youtube.com/watch?v=pOb1ebpe9eo&feature=related sounds nice and sits well...

http://www.yozzasport.co.uk/proddetail.php?prod=yozzasport_clio_172_exhaust_race This exhaust... and i havnt heard it in flesh but i hope its not OVER THE TOP loud as i cant judge by you tube videos.. phase 2 rear bumper on a phase 1? will the exhaust fit directly and will the phase 2...