Search results

Hi all, I’m looking for anybody who has had their alignment checked on their 220 trophy and has a printout. Also has anybody managed to get more than 12,000 miles out of a set of Supersports ? I’m not on my second set of front Supersports In 24k miles and each time the inside of the tyre is...

I was in the LY trophy, thing goes very well, suspect low boost conversion judging my the low down torque and on the quieter side !

Has anybody used one of these with the F4R ? I've been reading into them recently and I'm curious if they are actually effective, the topic seems to divide opinion and there's not much fact out there in regards to results. Davis Craig make a unit that's 80 L/min at 13V DC, it also draws 7.5A...

Hiya, Looking for some advice from people who've done stripped track cars, specifically on the PH1. I took my PH1 off the road some 18 months ago with the intention of doing the usual track spec conversion, after reassembling the car this past week I've found the car to not start. From what...

Hiya, looking for some advice on the timing belt on the f4r - I’ve changed the belt and installed a keyway’d pulley from the Megane. Used the genuine tools and all the torques set and rotated the engine over 2 reolvutions and rechecked the timing. I’m on my 5th time of setting and resetting...

Hope it didn’t belong to anybody on here :( https://www.copart.co.uk/lot/51808917

Appreciate I'm out on a limb here but does anybody know the engine oil capacity for a 2014 999cc twingo (mk3) ? I've been traversing the interwebs for a reliable source and yet to find one. Apparently these engines are sensitive to overfilling with them being at a strange angle. Cheers

At Tesco today, looked immaculate !

Was following you in the Trophy, seen the sticker in the rear window, car looked immaculate !

After owning a PH1 172 for nearly 4 years and covering many miles, the old dog has finally been retired after just ticking over 120,000 miles. I wanted something "fast" and special and after making a list of possible contenders, it came down to the Fiesta ST and the Trophy. For me the ST just...

What are people using for a Mitt at the moment ? I've had the sheepskin Mitt for around a year and the thing is just falling apart, I wouldn't say it's used that often either (https://www.shopnshine.co.uk/sheepskin-wash-mitt?___SID=U#details) Cheers

Or more affectionately known as the over Rev light that was fitted to the W and X ref PH1's. What part of the car produces this feature ? I thought perhaps the ECU but I moved my ECU from my old W reg (which had the light) to my current Y reg PH1 and the light does not work (Could be there's no...

I've blown 3 resistor packs in 2 months and it's getting really old having to pull the unit out. Does anybody know of an aftermarket resistor pack that fits the mk2 cup blower motor and is reliable ? Cheers Paul

Hiya, Does anybody have a wire diagram for a PH1 engine bay loom, fitted some parts yesterday and appears I've disturbed a wire - Car is cranking and fuel pump priming but it's not firing up (Fuse's are fine, no immobilizer and the fuel cut off hasn't popped) Cheers Paul

Hiya, Yesterday I took the ph1 to the track for the first time (First time I've done a track day and first time for the car since being rebuilt) at teeside autodrome, quite a tight track with lots of twisty stuff. Had a great time and the car was pretty much faultless with the exception of a...

Hiya, Had an issue on the weekend where the handbrake arm on the rear calliper (Where the handbrake cable hooks onto) snapped, are these removable ? I'm looking to buy a spare calliper and swap the arm over. I've just bled the rear callipers is all and I'd like to avoid removing it if I can.

Hiya, Bit of a strange one here, I bought a lovely PH1 a few months ago that I've been rebuilding, when I bought it I noticed I had to hold the fob button to start the car (I believe this is an immobiliser override) after inspecting under the bonnet it appears there is a relay override in...

http://www.pcworld.co.uk/gbuk/pc-accessories/pc-gaming-accessories/game-controllers/logitech-g27-racing-wheel-21406542-pdt.html These are normally ~£220 from what I've seen, £169.99 with free delivery and a free £80 Iphone 5 Gaming pad case !

I know this stuff is quite commonly used on here, however when I checked a tub I got the other day, It now has "Not for road use" printed on it! I purchased a bottle around a year ago and it does not have that label, has something new came in regulation wise ? Wonder if it will be checked on...

Hiya, Just had new front bearings pressed into the PH1 hubs and noticed one of the connecting arms for the calliper has bent. Anybody have any idea what material the hubs are ? I thought there were cast iron but from what I've seen, cast iron does not like to bend ! Hoping I can heat up the arm...

Not sure if anybody on here subscribes but enjoy: http://youtu.be/Cu6h5IoqkoA

Would this be considered normal wear and would you avoid using it ? It's only on these 3 (F4R Head) Oh and one for giggles, ouch !

Hi all, I'm in the process of rebuilding my F4R and I've just measured the compression ring squared up to the block. It's came out as 0.305mm, which to my understanding is past the 0.15 - 0.25 tolerance. Where is best to get a hold of a set of these and are they expensive ? I don't really want...

After the AA guy diagnosed the PH1 with a faulty ECU and or Loom, I replaced them and it still didn't start. So I started to dig and thought I would check what I assumed was the issue when it happened and what do you know. Slipped timing and bent valves sounds about right. New engine time :p

Has anybody experienced a dephaser pully that's broken to the point it causes the SERV light to come on ? The thing sounds like a transit and has a rough kick over on the dephaser. I managed to get the light off but as soon as I blip the pedal it comes back on. Code readers not giving me much in...

Hi all A flamer project I recently obtained had a leaking radiator, after checking it appears the drain plug was over tightened and it split the thread in half causing a leak, I checked the local scrap yards and they are all 1.2's which does not appear to have said plug ? You can see which...

Hi, All Does anybody know if the piston ring tolerances are in the workshop manuals ? I've trawled through the 5 or so I have but can't find any mention. On that note, does anybody know what they should be on a standard engine :rasp: Cheers Paul

Hi, all On the back of http://www.cliosport.net/forum/showthread.php?649475-HELP-! I really need some advice on where to go next, I've ordered a code reader to see if it will communicate with the ECU - at the moment the car will crank and fuel just not spark (Or in my case not strong enough)...

Well the Phase 1 has finally gave me a problem, on the way to work today a strange knock developed from the engine and lost a bit of power (Say 30%) I knew something was wrong so went to pull in where it lost alot of power and now after turning the engine off it wont fire up. It will crank and...