Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I have a 1.2 16v mk2. Was running fine until the other day. Then starting the engine took longer than usual, then it died twice, but started up. Finally it died whilst on an A road and wouldn't restart. It threw error codes df061 and 62. Replaced the coilpack and crank sensor and it worked...
have a problem with my engine, 1.2 16v 54 plate, newer d4f engine
slight loss of power, and a roar,,, sounds very loud, slightly lumpy too
checked ht leads and plugs, when i test by pulling one at a time, the engine changes tone, so they aren't the problem, i assume
been told that it may be...
have a problem with my engine, 1.2 16v 54 plate, newer d4f engine
slight loss of power, and a roar,,, sounds very loud, slightly lumpy too
checked ht leads and plugs, when i test by pulling one at a time, the engine changes tone, so they aren't the problem, i assume
been told that it may be...
I had my front alignment done yesterday as my steering wheel was out to the right a bit, they sorted the front and the drive is supposed to be spot on
I noticed on the print out that it says there is a difference in rear toe,one side is 0.06° and the other is 0.36 which results in a thrust of...
basically some old guy hit my wheel.. not the body work thank f**k!
axel is bent out, probably fucked the drums too, and wheel is beyond the point of repair, which is a shame as they are custom bored bbs
he didnt want to pay me cash :/ so told me to go through his insurance and he accepted full...
finally got round to sorting my trax photos, for a lil 1.2 it really does look alright
just to clarify, this is a extreme 3 model in malaga orange, which imo is nicer than inferno
and it is not a full sport rep, @Knuckles sorted me his old bumper which i fixed up and smoothed :)
rest...
looking to wrap my roof in gloss black wrap, but wanting to do a proper job, i will be taking the sunroof out.
not looking for people to tell me i shouldnt wrap it, because i am going to anyway, looking for advice on resealing the sunroof and the aerial.
sunroof:
how does the stock seal work...
basically i have this
and am tempted to do this:
any thoughts / ideas
was thinking of adapting a sport bumper instead, but cannot find the info on how to do it :/
also, anyone got any ideas of prices for a bumper spray if i do all the prep myself
cheers
So i run 165/50 r15 nankang ns2 on a 7j rim, brand new tyres as my old ones were eaten by the rear arch :tired:
my spare steelies are going bald, so will probably fail with them on
would the stretched tyres pass an MOT or will i have to source some wheels for the mot
??
I have a ns with a 182 interior minus the front door cards
I can dissemble the front cards and pop the material off
What would be the best way to cover them in alacantra and where would be the best place to source this stuff?
Thanks in advance
Got a set of shims at home needing to be fitted
I have a very limited tool arsenal,
What is the easiest way of going about fitting them to a non sport..?
Was told I could do it without dismembering the drum, if so what head do I need to remove the nut? Its some strange star shaped thing...
Got a spare set of door handles off a non sport for mine, i was going to colour code them
was planning on taking them to pieces and putting them back together when painted, however they have the bar securing the pieces together
what would be the best way of painting them?
cheers :cool:
I dont know if the methods of doing this are much different between sport/nonsport
if they arent or are, does anyone have a guide/instructions how to fit camber shims
what tools and how hard the job is etc
cheers :cool:
If anyone fancies these, with spigots for the clio :P
http://www.ebay.co.uk/itm/Bk-299-17-inch-4x100-pcd-Alloy-wheels-with-tyres-tuner-bolts-CLIO-CORSA-SAXO-/261446096766?pt=UK_CarParts_Acc_Wheels_tyres_Rims_Car_Wheels_ET&hash=item3cdf66d77e
ill do you a reduced rate of £100, for a set of 4 bk...
Fitted a set of bbs off an old e30 bmer
offset is et24, so lower then usual, lowered the car since also, so much that i have taken chunks out of my tyres at the back, even after raising it a bit im having problems
was gonna get some camber on the back anyway, may as well sort it now before i...
Steering wheel melt is of course a big problem with the poor choice of wheel materials
did anyone ever find a cheap fix? i saw some people scraped it all off, but it left the wheel all discoloured and nasty
ive got a load on my wheel, getting a replacement sport wheel with slight melt for...
http://www.ebay.co.uk/itm/UNIQUE-CLIO-BOOT-BADGE-IN-SPARKLING-METAL-FLAKE-Choice-Of-Colours-/360818590025?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item540276c149
much sparkle.
very clio.
wow.
Hey guys
managed to pick up a decent set of bbs from a bimmer for just over 50 quid
the problems are, center bore (57.1) on a e30 and the offset
whats the lowest offset i would be able to use on the clio and where would i go to get them bored out?
cheers
ben
Looked clean
Tried to catch up with you on the a24 but I realised you probably have 100bhp more than me!
Lol, bloody 1.2 shitty engine!
Anyway looked good
Nice to see a local, if your on cs or not!
hey guys, got some coilovers and gonna fit them tomorrow (dependant on the weather)
anyone know of any decent garages near horsham in west sussex that will do alignment?
will have to get the clio booked in soon when im all set up!
also does anyone have any good tips when installing coilovers...
Alright guys,
finally got round to sorting out a little project thread on here for my malaga orange 1.2.
This is my first car so i dont want to be throwing loads of money at it.
this is what it looked like at stock
So the first thing i did was get some alloys, they were cheap and i fancied...
I have seen lots of people raving about the cheapness of the Rokkor or Raceland coilovers, and i know they will fit my little 1.2 16v with 58mm spacing (will double check when the morning light comes), but i cannot seem to find them anywhere!
I have chosen to do the full coilover change because...
hey guys, im a newbie here and am having some issues working out the measurements for alloy wheels for my mk2 clio
my mate has some SRI alloys and i think they look really great and are almost perfect fit for the clio
the only issue i have is with the centre bore
the measurements for his...