ds2500 correct part number for 182 cup

[clioalesi]

Hi guys,

I'm needing the correct part number for ds2500 front pads for a 182 cup to go onto standard brake disks.

I know there are more than 1 part number and I'm ordering from demon tweeks to Australia and want the correct part the first time.

Your help would be appreciated.

Cheers

 

[Fred@BTM]

FCP565H (they do need the edges grinding down a wee bit though)

speak to John Harris, he'll sort you the correct ones

 

[clioalesi]

cheers thanks Fred

 

[p@blo]

FCP565H (they do need the edges grinding down a wee bit though)

Don't they just! My set needed the leading edge grinding too to get the slight clearance on the top of the caliper to stop them binding.

 

[Fred@BTM]

you need too have at least 1mm vertical play of the pad in the carrier (remove the pad shims, that is a MUST DO!) to allow for expansion otherwise they will squeal

 

[p@blo]

you need too have at least 1mm vertical play of the pad in the carrier (remove the pad shims, that is a MUST DO!) to allow for expansion otherwise they will squeal

Yup, the spring seat was just jammed up solid against the top of the carrier without any grinding/filing of the seating faces. Still running the stainless shims, again to help allevaite binding as the casting on my carriers isn't the best/smoothest. Runs fine with little to no squeal to be fair.

 

[Fred@BTM]

bin the shims, seriously, they cause SO much hassle, i bang on about s**t for a reason LOL! you should have NO noise at all from them