Fitting interior sticker

[yeecup]

Hi, bought a cliosport sticker for my back window, interior one, problem is can't get it to stick to the window, just stays on the applicator backing bit, tried rubbing it etc but won't come off, thinking maybe heating it with a hair dryer.?

 

[Bluebeard]

It needs to be warm. Try putting the sticker on with the heated rear window on (if there's where it's going) then pull the backing off after a couple of minutes.

 

[yeecup]

Makes sense it was freezing when I was trying to fit it. Yeah back window

 

[mark smith87]

It won't separate if its cold.

 

[Robert172sport]

I tried this the other morning and the same thing happened to me :banghead:, heat it up and it comes off fine but you have to do it slowly :race:

 

[yeecup]

Tried this morning after driving to work with rear window heater on, still didn't work, looks like I need to try a hair dryer

 

[Zeitgeist0190]

Yeah mine sort of came apart in multiple bits and ultimately got ruined because i was putting it on in a cold workshop! I'll have to get another!

 

[Brian]

Wait till summer! :rasp:

 

[yeecup]

^^ lol. well its still on but held on with the backing sticker, going to attempt to heat it up tonight with the wifes hairdryer and hopefully the neighbours dont see me.

 

[JamesBryan]

Either heat it up as said or wait til it's a bit warmer.

Vinyl works best with the ambient temp being 8+ degrees.

 

[montana]

When i put both my URL ones on my rear windows it took me ages as each letter did not seperate easily, i ended up using my membership card behind the backing to force it onto the window, that and removing it at a sharp angle from the window. Bit of a pain, but i was doing it on a cold dark evening.

Turned out fine though