Ticky Gearbox Noise, Need Advice

[cliosportap]

Although i rebuilt my gearbox 2 times i have a ticky noise when car works on idle.
İcant hear it while driving. On idle when i press the clutch the sound goes away and when i leave it comes again. We checked everything but cant find it. İ searched this conditon and find that it can be from the input shaft bearings as shown it the picture. But not sure for it
Because there is a oil leak in my crank seal i will take off again the gearbox again and while changing the seal i want to look again to the gearbox
You can watch the videos but because low quality it sound 3 times more
İn normaly the noise is almost 3 times less.
İn the first video you can hear that when i press the clutch the noise goes away.
So what can it be, can anyone give an idea?

[youtube]t5Fqka3OwTA[/youtube]

[youtube]LoXAoabmx1E[/youtube]

 

[cliosportap]

no one can help?

 

[en035]

I have got a spare complete gearbox (jc-089, located in Izmir), P.M. me if you are interested in?

 

[Clio-Ell]

Release bearing and clutch?

 

[cliosportap]

Release bearing and clutch?

i have changed the clutch kit with original valeo part from renault.
the sound is coming from inside the gearbox

 

[mini-valver]

Did you change the input bearings?

 

[cliosportap]

Did you change the input bearings?

no i didnt, the mechanic said that they are ok
but i am not sure because of the noise

 

[mini-valver]

Rebuilt the box but didn't change input shaft bearings? WTF?

When you pull the box off check for play in it. I had zero play in mine but it was shagged!

 

[cliosportap]

Rebuilt the box but didn't change input shaft bearings? WTF?

When you pull the box off check for play in it. I had zero play in mine but it was shagged!

you mean you had the same problem because of bearings?

 

[foxspeed]

a "tick" sounds more like gear chatter - is the pre-load correct on the shafts

 

[cliosportap]

a "tick" sounds more like gear chatter - is the pre-load correct on the shafts

yes we checked it 2 times

 

[Alex_X93]

Input shaft or bearings imo.

 

[cliosportap]

Input shaft or bearings imo.

i think the same but not sure:S

 

[GodSpeed]

Rebuilt the box but didn't change input shaft bearings? WTF?

When you pull the box off check for play in it. I had zero play in mine but it was shagged!

The Renault gearbox manual does not state that the bearings must be changed when rebuilding the box. May be stupid not to change them with a high milage box though.

 

[franx]

The Renault gearbox manual does not state that the bearings must be changed when rebuilding the box. May be stupid not to change them with a high milage box though.

yep and they love the manual at Renault

 

[GodSpeed]

yep and they love the manual at Renault

No I bet they dont and neither do I, but Im gussing that is from other reasons. Such as very bad images, unclear descriptions etc. However the manual states very clear what parts must be changed if the box is dissembeled.

 

[mini-valver]

They tell you what to replace if you strip the box, yeah, obviously. You're supposed to use new headbolts when you take the head off but it wont tell you to replace a lifter, lol.

 

[Mike@Rentech]

Thats fucked, sounds horrible.
Remove and start again is my advise.