Help : Fitting new injector

04-182

ClioSport Club Member

  AB Clio 182

• Aug 18, 2017

• #1

Help. to keep it really short i've changed one of my injectors. When i took the rail off it was tight and i had to pull it quite hard as the o-rings where well in there. When i've come to put it back on i cant get the injectors/o-rings to go back in. if i tighten up the rail it gets a slight bend in it. do the injectors o-rings have to slot inside or just push up against it.

Tried to waggle, jiggle, joggle etc but not getting anywhere. No 1 goes in easily. 2, 3( new one) and 4 dont. Is there a trick?

Help please as car is currently in pieces on the drive

 

Budgie

  330i. E30 Touring.

• Aug 18, 2017

• #2

Yep, they all need to push in.
Use a bit of grease/spit/petrol on the o-rings to help them slide in.

Start at one end, number 1 if it goes in easily, and push firmly one at a time.

@04-182

 

04-182

ClioSport Club Member

  AB Clio 182

• Aug 18, 2017

• #3

ok. will crack on and keep trying. Thanks

 

leedsboy

ClioSport Club Member

  Bean 182 + E70 X5

• Aug 18, 2017

• #4

I'll be tackling this at the weekend. Mine seemed bloody well stuck in when I was trying to pull them out.

As above, get some oil or something on the o rings to make it a bit easier.

 

Coops Mk1

ClioSport Club Member

  Lots of Scrap...

• Aug 18, 2017

• #5

ai just use some Vaseline or similar on the ring....ahem

 

Budgie

  330i. E30 Touring.

• Aug 18, 2017

• #6

@leeds2592 Yeah, some of them feel like you're going to snap the rail by pulling them out.

I find it helps to angle them up and down as you pull to try and break the seal.

 

04-182

ClioSport Club Member

  AB Clio 182

• Aug 18, 2017

• #7

Thanks guys they're back in after a lot of pushing and wiggling and a bit of lube (spit). cars running much smoother and idling lower so result and no more fault light.

 

JamesBryan

ClioSport Club Member

  OG Megane 265

• Aug 18, 2017

• #8

A squirt of wd40 and wiggle the rail helps to get them out.

Engine oil on the o-rings to get them back in.

 

dann2707

ClioSport Club Member

  BMW 335D Touring

• Aug 18, 2017

• #9

leeds2592 said:

I'll be tackling this at the weekend. Mine seemed bloody well stuck in when I was trying to pull them out.

As above, get some oil or something on the o rings to make it a bit easier.

Click to expand...

THIS IS RECYCLED ADVICE.

THIS GUY IS A GREAT BIG PHONY

 

leedsboy

ClioSport Club Member

  Bean 182 + E70 X5

• Aug 18, 2017

• #10

dann2707 said:

THIS IS RECYCLED ADVICE.

THIS GUY IS A GREAT BIG PHONY

Click to expand...

😂

 

Chris_Beer

  Glacier White Cup

• Aug 18, 2017

• #11

@Davyy

 

Stay Puft

ClioSport Club Member

  Clio 172

• Aug 19, 2017

• #12

Took me about two hours to push them in, but go in at an angle and just keep pushing haha

 

B

bloke

  dan's cast offs.

• Aug 19, 2017

• #13

Davyy said:

Took me about two hours to push them in, so i gave up and got my mum to do it for me.

Click to expand...