Search results

Hi. Does anyone know how to remove the cigarette lighter from the surround please. I can get the main section to pop out but then gets caught on the yellow part. How do you separate the two parts to get it out of the hole? Thanks.

Hi. I went to my car earlier to check and see if the aircon had any pressure in it as i want to change the condenser. When I turned it on I get no blowers at all in the car. Wether I select hot or cold, aircon on or off etc nothing. Pretty sure the heater abs blower worked a few months ago but...

Hi. Maybe a stupid question but here goes. I’ve got a set of Turinis for my 182 and would like to get some new wheel bolts as the ones I currently have are naff. What is the correct size abs style please and any recommendations? Wheels are OE Renault and cup offset. thanks in advance

Hi, I'm slowly working on my 182 as I get chance and the aircon condenser has definitely seen better days and isn't secure. It flaps about at the bottom as looks like the bracket is totally shot. I'd like to replace it myself (maybe the radiator aswell but will look at that when its out) and...

Hi, As with a lot of people I've got board lately and decided to have a play with my 3d Printer. Decided to try a DIY air duct to go in the spot light hole. Here's the results of 1 1/2 days play. What's your thoughts if any? Also I don't have ducting and not planning on doing it. just fancied...

Hi. Does anyone know the part number for this Milltek cat to exhaust adaptor pipe? Thanks in advance

Hi, Can anyone tell me the part numbers for these headlight connectors please or a link to where I can get them from please? Thanks in advance

Hi, I'm just wondering if anyone has bought parts from Partsouq before. Been looking for a wheel arch liner for a while now and going to just buy a new one but spotted their website. They seem rather cheap and not sure how a company in UAE is nearly half the price of anyone else. Postage to the...

Hi. Just wondering what locking wheel nuts people recommend. Car doesn’t have any spacers fitted and will have either std 182cup wheels or Turinis on. Thanks in advance.

Hi, i use the frame rails at the front when i put my car on stands but where do i put them at the rear? I need to drop the rear axle so that i can change the springs but don't want to use the sills as they're not great. Thanks in advance

Hi. Can anyone tell me if there is supposed to be a blank in the middle hole. Seems odd that there is one either side. Both sides of mine are the same. Also on the frame rail. If yes where do I get them from. Thanks in advance.

Hi, Can anyone recommend a good garage (or mobile) near hull for Cambelt pulleys etc. Got a wishy washy receipt for belt but not sure i trust it. Just looking for recommendations at the moment. Used to take my old 182 to an Ex Renault main dealer mechanic who set up on his own place.

Hi, can someone tell me what cables these are please? I bought a job lot of parts off ebay as it had a few parts in that I wanted/needed. There is loads of bits and i'm trying to work out what they are. Thanks.

High. Does anyone know where to get replacement bolts and nuts for the wishbone on a 182 please? Had to cut one of mine off and the nuts are nyloc so want to replace them. Know they’re m12 high tensile flange but can’t seem to find the right length bolt (can get close) but can’t seem to find the...

Hi. I’ve had to cut/split the nut on my inner tie rod to get the ball joint off. Does anyone know what size/type the nut is please? Looks about an m12 but it’s pretty thin compared to normal nuts. thanks.

Hi, I have an inlet manifold and my calipers which look like they have been painted with a spoon. Whats the best way to strip the paint off so I can redo it please? Thanks in advance

Hi. Looking for some advice. I need to fit a new abs ring on my NSF as the ring and sensor are missing. (No fault codes so guess it’s been clipped out). My Question is. It looks like the abs ring has been missing for some time and where the ring sits looks to be very corroded. Do you think it...

Hi. Has anyone ever drilled out the spot welds and replaced the wing/bumper/headlight bracket on a 182. Mines been bent and I’ve started to straighten it but just wondered if it’s easier to just replace. Thanks

Hi, Can anyone tell me what and where to find replacements of these please? Wing to frame and bumper etc Bolts and fasteners please? Thanks in advance.

Ok, so I've managed to get a little more time and started to strip back the front end of the Clio so see why the wing doesn't fit properly. I had a feeling but wasn't sure when i bought it but had HPI checked it before. Anyway its got some bent bits. It looks to me like its had a light bump...

Probably a daft question but is there supposed to be a sensor on both front wheels struts. Also, for the front shock. If cup shocks are is the 60mm bolt centre to centre?$ No fault light on the dash Thanks.

Hi, I've recently got a new Clio 182 which I bought as a blind gamble off ebay and as expected it has faults (it was cheap so knew there would be issues). whilst checking it over today down the back of the engine I've found a damaged pipe (brake servo vacuum I've found out) and a well and...

Hi, Quick question about 182 Cup Vs Non Cup rear shocks. Basically, whats the difference? I had an 04 182 but sold it a few years ago, regretted it and recently bought another 54 182 which needs some work. I knew about the difference in front shocks between cup and non cup but didn't know the...

Help. to keep it really short i've changed one of my injectors. When i took the rail off it was tight and i had to pull it quite hard as the o-rings where well in there. When i've come to put it back on i cant get the injectors/o-rings to go back in. if i tighten up the rail it gets a slight...

Help... losing the will. Hi, my clio started flagging a P0303 fault (see another thread) which i'm trying to sort out. So far changed plugs, leads and coil pack. Running a tank of fuel with injector cleaner prior to taking the leap and changing the injector(s) which seemed to be improving...

Hi, i know this has been posted before but couldn't see any recent advice/posts so apologies. I have an 04 Clio 182 which has started to Flag a P0303 fault but only when it starts up or sat in traffic. Did it a few times before i got an OBDII reader. It clears though as soon as the car gets...

Hi, I hope someone can help me with this. My front washer jet stopped working properly so I followed a post on here. Stripped it all out and fitted 2 new pumps. When I tested it everything was fine. With a grin on my face I checked it again and that's when it all seems to have gone wrong. Now...