Search results

Was down southend and saw 4 clios, two racing blue 182's, blue 172 cup and a grey 172 and all looked mint :D

Hiya peeps Thinking of changing my alloys for Pro Race 1.2s, just wondered if any one had any pics of a 182 with Pro Race 16s on? Cheers

Hiya all Just a quick one, would these alloys fit a clio 182 as not quiet sure what offset and ET mean? Cheers Offset - 7Jx16CH ET - 35 PCD - 100/4 Tyre size - 195 45 R16

Hiya Minted up my Clio today using Smart Wax and it come out well shiny, so thought i take a few pics :D

Hiya Lately, iv noticed that my 182 drives badly when cold. It feels realy jerky and lumpy, but as soon as its warmed up, drives perfect? Any one got any ideas what could be up with it? Many Thanks Chris

Hiya Just a quick 1, would a 172 coil pack fit a 182? Cheers Guys

Hiya Saw ya driving the opposite direction, I was in a racing blue 182 (if you could see the blue through all the dirt he he) Yellow is well mint

Hiya guys My clio has started making a funny winning noise and gets loader the faster i go and also sounds as if its coming from the front. Iv also noticed that it also gets louder when I steer to the left. Is this likely to be the wheel bearing and if so, are they easy to change? Cheers

Hiya Just brought a 360 and was just wondering if its possible to upload picture from my PC or Camera and use it as a gametag. Iv tried connecting my USB Pen and can see the pictures, but no option to save them to the 360 Hardrive and use them? Cheers

Hiya Guys/Gals Need a bit of advice. My 182 has been playing up a bit lately and had a probelm with the engine management light coming on and then the car runs crap. It was coming up with a lamba sensor fault and had the lamba sensors replaced under warrenty. The only problem is, the same...

Hiya peeps Dont suppose anyone had got a Clio 182 airbox and filter I can borrow and lives near Waltham Cross in N London/Hertfordshire. Its just iv got to get my car repaired at renault and worried my warrenty would be void with the induction kit. If any one has, it would be very much...

Hiya Guys/Gals Iv got a 2004 182 and have a major probelm with it. Just turned it on and while deicing it, noticed the engine wasnt sounding to great and souded as if it wanted to cut out. I then looked on the dash and could see the engine management light and a orage light which looks like a...

Hiya Guys/Gals Was looking at You Tube and saw a load of Clio Vids including this one of a Clio 182 beating a Type R. Thought it was quiet cool so hear it is :0) http://www.youtube.com/watch?v=23lvO_Zp4nk&mode=related&search=

Hiya Had a look on this on ebay and wondered if one of these fit a Clio 182...

Hiya Was driving in the opposite direction and noticed your motor coming the other way? Cheers

Hiya Dont suppose if any one knows if a Samco Silicone Hose kit from a Clio 172 will fit a Clio 182. Its just I found a few kits cheap on the net, but there all for 172s! Cheers

Hiya all In need of some advice, brought my 182 to Renault for some warrenty work to be done, however, when repairing it, they said they come accross 8 wires in the loom which has been cut into and they would get back to me. I was totaly unaware of any of this and the previous owner told me...

Just thought some of you guys might want to see how chroming come out on my mainifold :D http://www.cliosport.net/forum/showthread.php?p=1993482&posted=1#post1993482

Hiya My 182 is just in renault at the moment (Again :( ) and they have told me that the oxygen sensor is faulty due to external damage and there for, its not covered by warrenty :mad: . I assume this is because I have a stainless and janspeed cat. They have quoated me 80 quid for the sensor...

Hiya Brought some Racing Brake Fluid 5.1 Dot on Ebay, but after having a good look at it, its not fully synthetic. Does this matter or do you have to use synthetic brake fluid on a Clio 182 :S . Many Thanks Chris

Hiya peeps Just seen this induction kit on ebay and wondered what you guys thought. Its same as the GrouppM induction kit, but but well under half the price. Has any one else got one of these, if so whats it like as it look awsome! Hears the link...

Hiya guys/gals Just brought a polished Fuel Rail off Ebay and now want to polish the inlet mainifold. Just wondering how you go about doing it? Do you need to take the inlet mainifld off or can it be done whilst still on the car. Also, how long does it take if you work flat out:D ? Cheers

Hiya peeps Iv currently got a Viper, but have been thinking of changing it to a Universal Carbon Dynatwist filter as every one says the viper is rubish. Just wondering if anyone else had fitted one of these as im not sure if it will fit under the bonnet and if they have, is it any good? Cheers

Hiya peeps Saw quiet a few Clio 182's/172's at FCS with strut braces and now toying with the idea of getting one. Just wondered how hard they are to fit. Is it just a matter of bolting them on or does it reqire drilling etc? Also, what strut braces would you recomend, would like a chrome or...

:D Hiya peeps Was looking through Ebay and come accross a bloke selling these performace plugs and wondered if any one has used them before? They do look and sound the part, just wondered what you guys thought before buying them. http://www.brisk.biz/index.php?page=svicky_premium.html...

Hiya all Have been looking at upgrading my normal viper on my 182 for a Viper Evolution instead and was wondering if anyone else done the same as am still debating weather to do it or not? Looks alot bigger that the normal viper and would imagine it would be a lot less restrictive and there...

Hiya all Gona get my 182 serviced and was wondering whats the best Plugs you can get for the 182. Was looking at Denso Iridium and was wondering if there any good or should I go for some other ones? Cheers all

Hiya all Fitted a Pipercross Viper on my Clio 182 and with out the Cold Air feed pipe fitted, feeled the same speed wise, but sounded better. However, when I conected the cold air feed, it is noticlby slower. I have the air feed and bell mouth installed in the bottom grill and there is no...

Hiay peeps Want to get my 182 chipped/remaped but am unsure as to what is the best place to go and what it actualy involves, so any advice would be appreciated. Iv already got a Viper Induction kit, high flow cat and full stainless and ecotec valve, so what sort of power gains can I expect to...